Analog signal processing is any type of signal processing conducted on continuous analog signals by some analog means (as opposed to the discrete Digital Signal Processing where the signal processing is carried out by a digital process). "Analog" indicates something that is mathematically represented as a set of continuous values. This differs from "digital" which uses a series of discrete quantities to represent signal. Analog values are typically represented as a voltage, electric current, or electric charge around components in the electronic devices. An error or noise affecting such physical quantities will result in a corresponding error in the signals represented by such physical quantities.
Examples of analog signal processing include crossover filters in loudspeakers, "bass", "treble" and "volume" controls on stereos, and "tint" controls on TVs. Common analog processing elements include capacitors, resistors, inductors and transistors.
Contents

Tools used in analog signal processing 1

Convolution 1.1

Fourier transform 1.2

Laplace transform 1.3

Bode plots 1.4

Domains 2

Time domain 2.1

Frequency domain 2.2

Signals 3

Sinusoids 3.1

Impulse 3.2

Step 3.3

Systems 4

Linear timeinvariant (LTI) 4.1

See also 5

References 6
Tools used in analog signal processing
A system's behavior can be mathematically modeled and is represented in the time domain as h(t) and in the frequency domain as H(s), where s is a complex number in the form of s=a+ib, or s=a+jb in electrical engineering terms (electrical engineers use j because current is represented by the variable i). Input signals are usually called x(t) or X(s) and output signals are usually called y(t) or Y(s).
Convolution
Convolution is the basic concept in signal processing that states an input signal can be combined with the system's function to find the output signal. It is the integral of the product of two waveforms after one has reversed and shifted; the symbol for convolution is *.

y(t) = (x * h )(t) = \int_{a}^{b} x(\tau) h(t  \tau)\, d\tau
That is the convolution integral and is used to find the convolution of a signal and a system; typically a = ∞ and b = +∞.
Consider two waveforms f and g. By calculating the convolution, we determine how much a reversed function g must be shifted along the xaxis to become identical to function f. The convolution function essentially reverses and slides function g along the axis, and calculates the integral of their (f and the reversed and shifted g) product for each possible amount of sliding. When the functions match, the value of (f*g) is maximized. This occurs because when positive areas (peaks) or negative areas (troughs) are multiplied, they contribute to the integral.
Fourier transform
The Fourier transform is a function that transforms a signal or system in the time domain into the frequency domain, but it only works for certain functions. The constraint on which systems or signals can be transformed by the Fourier Transform is that:

\int^\infty_{\infty} x(t)\, dt < \infty
This is the Fourier transform integral:

X(j\omega) = \int^\infty_{\infty} x(t)e^{j\omega t}\, dt
Usually the Fourier transform integral isn't used to determine the transform; instead, a table of transform pairs is used to find the Fourier transform of a signal or system. The inverse Fourier transform is used to go from frequency domain to time domain:

x(t)=\frac{1}{2\pi}\int^\infty_{\infty} X(j\omega )e^{j\omega t}\, d\omega
Each signal or system that can be transformed has a unique Fourier transform. There is only one time signal for any frequency signal, and vice versa.
Laplace transform
The Laplace transform is a generalized Fourier transform. It allows a transform of any system or signal because it is a transform into the complex plane instead of just the jω line like the Fourier transform. The major difference is that the Laplace transform has a region of convergence for which the transform is valid. This implies that a signal in frequency may have more than one signal in time; the correct time signal for the transform is determined by the region of convergence. If the region of convergence includes the jω axis, jω can be substituted into the Laplace transform for s and it's the same as the Fourier transform. The Laplace transform is:

X(s) = \int^\infty_{0^} x(t)e^{s t}\, dt
and the inverse Laplace transform, if all the singularities of X(s) are in the left half of the complex plane, is:

x(t)=\frac{1}{2\pi}\int^\infty_{\infty} X(s )e^{s t}\, d s
Bode plots
Bode plots are plots of magnitude vs. frequency and phase vs. frequency for a system. The magnitude axis is in Decibel (dB). The phase axis is in either degrees or radians. The frequency axes are in a logarithmic scale. These are useful because for sinusoidal inputs, the output is the input multiplied by the value of the magnitude plot at the frequency and shifted by the value of the phase plot at the frequency.
Domains
Time domain
This is the domain that most people are familiar with. A plot in the time domain shows the amplitude of the signal with respect to time.
Frequency domain
A plot in the frequency domain shows either the phase shift or magnitude of a signal at each frequency that it exists at. These can be found by taking the Fourier transform of a time signal and are plotted similarly to a bode plot.
Signals
While any signal can be used in analog signal processing, there are many types of signals that are used very frequently.
Sinusoids
Sinusoids are the building block of analog signal processing. All real world signals can be represented as an infinite sum of sinusoidal functions via a Fourier series. A sinusoidal function can be represented in terms of an exponential by the application of Euler's Formula.
Impulse
An impulse (Dirac delta function) is defined as a signal that has an infinite magnitude and an infinitesimally narrow width with an area under it of one, centered at zero. An impulse can be represented as an infinite sum of sinusoids that includes all possible frequencies. It is not, in reality, possible to generate such a signal, but it can be sufficiently approximated with a large amplitude, narrow pulse, to produce the theoretical impulse response in a network to a high degree of accuracy. The symbol for an impulse is δ(t). If an impulse is used as an input to a system, the output is known as the impulse response. The impulse response defines the system because all possible frequencies are represented in the input
Step
A unit step function, also called the Heaviside step function, is a signal that has a magnitude of zero before zero and a magnitude of one after zero. The symbol for a unit step is u(t). If a step is used as the input to a system, the output is called the step response. The step response shows how a system responds to a sudden input, similar to turning on a switch. The period before the output stabilizes is called the transient part of a signal. The step response can be multiplied with other signals to show how the system responds when an input is suddenly turned on.
The unit step function is related to the Dirac delta function by;

\mathrm{u}(t) = \int_{\infty}^{t} \delta (s)ds
Systems
Linear timeinvariant (LTI)
Linearity means that if you have two inputs and two corresponding outputs, if you take a linear combination of those two inputs you will get a linear combination of the outputs. An example of a linear system is a first order lowpass or highpass filter. Linear systems are made out of analog devices that demonstrate linear properties. These devices don't have to be entirely linear, but must have a region of operation that is linear. An operational amplifier is a nonlinear device, but has a region of operation that is linear, so it can be modeled as linear within that region of operation. Timeinvariance means it doesn't matter when you start a system, the same output will result. For example, if you have a system and put an input into it today, you would get the same output if you started the system tomorrow instead. There aren't any real systems that are LTI, but many systems can be modeled as LTI for simplicity in determining what their output will be. All systems have some dependence on things like temperature, signal level or other factors that cause them to be nonlinear or nontimeinvariant, but most are stable enough to model as LTI. Linearity and timeinvariance are important because they are the only types of systems that can be easily solved using conventional analog signal processing methods. Once a system becomes nonlinear or nontimeinvariant, it becomes a nonlinear differential equations problem, and there are very few of those that can actually be solved. (Haykin & Van Veen 2003)
See also
circuits
filters
References

Haykin, Simon, and Barry Van Veen. Signals and Systems. 2nd ed. Hoboken, NJ: John Wiley and Sons, Inc., 2003.

McClellan, James H., Ronald W. Schafer, and Mark A. Yoder. Signal Processing First. Upper Saddle River, NJ: Pearson Education, Inc., 2003.
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.