World Library  
Flag as Inappropriate
Email this Article

Bourke engine

Article Id: WHEBN0003146340
Reproduction Date:

Title: Bourke engine  
Author: World Heritage Encyclopedia
Language: English
Subject: Reciprocating engine, Two-stroke engine, Bourke, Piston engine configurations, Flat-ten engine
Collection: Engine Technology, Piston Engines, Proposed Engines, Two-Stroke Engine Technology
Publisher: World Heritage Encyclopedia

Bourke engine

four cylinder Bourke Engine
Figure 2 from Patent US 2172670 A
Figure 1 from Patent US 2172670 A
Animation of a four cylinder bourke engine

The Bourke Engine was an attempt to improve the two-stroke engine by Russell Bourke in the 1920s. Despite finishing his design and building several working engines, the onset of World War II, lack of test results,[1] and the poor health of his wife compounded to prevent his engine from ever coming successfully to market. The main claimed virtues of the design are that it has only two moving parts, is lightweight, powerful, has two power pulses per revolution, and does not need oil mixed into the fuel.

The Bourke engine is basically a two-stroke design, with one horizontally opposed piston assembly using two pistons that move in the same direction at the same time, so that their operations are 180 degrees out of phase. The pistons are connected to a Scotch Yoke mechanism in place of the more usual crankshaft mechanism, thus the piston acceleration is perfectly sinusoidal. This causes the pistons to spend more time at top dead center than conventional engines. The incoming charge is compressed in a chamber under the pistons, as in a conventional crankcase-charged two-stroke engine. The connecting-rod seal prevents the fuel from contaminating the bottom-end lubricating oil.


  • Operation 1
  • Design features 2
    • Mechanical features 2.1
    • Gas flow and thermodynamic features 2.2
    • Lubrication 2.3
  • Claimed and measured performance 3
  • Engineering critique of the Bourke engine 4
  • Patents 5
  • References 6
  • External links 7


The operating cycle is very similar to that of a current production spark ignition two-stroke with crankcase compression, with two modifications:

  1. The fuel is injected directly into the air as it moves through the transfer port.
  2. The engine is designed to run without using spark ignition once it is warmed up. This is known as auto-ignition or dieseling, and the air/fuel mixture starts to burn due to the high temperature of the compressed gas, and/or the presence of hot metal in the combustion chamber.

Design features

The following design features have been identified:

Mechanical features

  • Scotch yoke instead of connecting rods to translate linear motion to rotary motion
  • Fewer moving parts (only 2 moving assemblies per opposed cylinder pair) and the opposed cylinders are combinable to make 2, 4, 6, 8, 10, 12 or any even number of cylinders
  • Smoother operation due to elimination of crank and slider mechanism
  • The piston is connected to the Scotch yoke through a slipper bearing (a type of hydrodynamic tilting-pad fluid bearing)
  • Mechanical fuel injection.
  • Ports rather than valves.
  • Easy maintenance (top overhauling) with simple tools.
  • The Scotch yoke does not create lateral forces on the piston, reducing friction, vibration and piston wear.
  • O-rings are used to seal joints rather than gaskets.
  • The use of the Scotch Yoke reduces vibration from the motions of the connecting rod—for example, the peak acceleration in a Scotch yoke is 25% less than the acceleration in a conventional crank and slider arrangement. The piston movement and therefore vibration is sinusoidal so the engine could theoretically be perfectly counterbalanced, unlike a conventional engine which has harmonics in the piston movement courtesy of the lateral movement of the crankpin.
  • The Scotch Yoke makes the pistons dwell very slightly longer at top dead center, so the fuel burns more completely in a smaller volume.

Gas flow and thermodynamic features

  • Low exhaust temperature (below that of boiling water) so metal exhaust components are not required, plastic ones can be used if strength is not required from exhaust system
  • 15:1 to 24:1 compression ratio for high efficiency and it can be easily changed as required by different fuels and operation requirements.
  • Fuel is vaporised when it is injected into the transfer ports, and the turbulence in the intake manifolds and the piston shape above the rings stratifies the fuel air mixture into the combustion chamber.
  • Lean burn for increased efficiency and reduced emissions.


  • This design uses oil seals to prevent the pollution from the combustion chamber (created by piston ring blow-by in four-strokes and just combustion in two-strokes) from polluting the crankcase oil, extending the life of the oil as it is used slowly for keeping the rings full of oil to hold and use to lubricate. Oil was shown to be used slowly by the dropfull as needed, but checking the quantity and cleanness of it was still recommended by Russell Bourke, its creator.
  • The lubricating oil in the base is protected from combustion chamber pollution by an oil seal over the connecting rod.
  • The piston rings are supplied with oil from a small supply hole in the cylinder wall at bottom dead center.

Claimed and measured performance

  • Efficiency 0.25 (lb/h)/hp is claimed - about the same as the best diesel engine,[2] or roughly twice as efficient as the best two strokes.[3] This is equivalent to a thermodynamic efficiency of 55.4%, which is an exceedingly high figure for a small internal combustion engine. In a test witnessed by a third party, the actual fuel consumption was 1.1 hp/(lb/h),[4] or 0.9 (lb/h)/hp, equivalent to a thermodynamic efficiency of about 12.5%, which is typical of a 1920s steam engine.[5]
  • Power to weight 0.9[6] to 2.5 hp/lb is claimed, although no independently witnessed test to support this has been documented. The upper range of this is roughly twice as good as the best four-stroke production engine shown here,[7] or 0.1 hp/lb better than a Graupner G58 two-stroke.[8] The lower claim is unremarkable, easily exceeded by production four-stroke engines, never mind two strokes.[9]
  • Emissions Achieved virtually no hydrocarbons (80 ppm) or carbon monoxide (less than 10 ppm) in published test results,[10] however no power output was given for these results, and NOx was not measured.
  • Low Emissions The engine is claimed to be able to operate on hydrogen or any hydro-carbon fuel without any modifications, producing only water vapor and carbon dioxide as emissions.

Engineering critique of the Bourke engine

The Bourke Engine has some interesting features, but the extravagant claims[11] for its performance are unlikely to be borne out by real tests. Many of the claims are contradictory.[12]

  1. Seal friction from the seal between the air compressor chamber and the crankcase, against the connecting rod, will reduce the efficiency.[13]
  2. Efficiency will be reduced due to pumping losses, as the air charge is compressed and expanded twice but energy is only extracted for power in one of the expansions per piston stroke.[14][15]
  3. Engine weight is likely to be high because it will have to be very strongly built to cope with the high peak pressures seen as a result of the rapid high temperature combustion.[16]
  4. Each piston pair is highly imbalanced as the two pistons move in the same direction at the same time, unlike in a boxer engine.[17] This will limit the speed range and hence the power of the engine, and increase its weight due to the strong construction necessary to react the high forces in the components.[18]
  5. High speed two-stroke engines tend to be inefficient compared with four-strokes because some of the intake charge escapes unburnt with the exhaust.[19]
  6. Use of excess air will reduce the torque available for a given engine size.[20]
  7. Forcing the exhaust out rapidly through small ports will incur a further efficiency loss.[21]
  8. Operating an internal combustion engine in detonation reduces efficiency due to heat lost from the combustion gases being scrubbed against the combustion chamber walls by the shock waves.[22]
  9. Emissions - although some tests have shown low emissions in some circumstances, these were not necessarily at full power. As the scavenge ratio (i.e. engine torque) is increased more HC and CO will be emitted.[23]
  10. Increased dwell time at TDC will allow more heat to be transferred to the cylinder walls, reducing the efficiency.[24]
  11. When running in auto-ignition mode the timing of the start of the burn is controlled by the operating state of the engine, rather than directly as in a spark ignition or diesel engine. As such it may be possible to optimize it for one operating condition, but not for the wide range of torques and speeds that an engine typically sees. The result will be reduced efficiency and higher emissions.[25]
  12. If the efficiency is high, then combustion temperatures must be high, as required by the Carnot cycle, and the air fuel mixture must be lean. High combustion temperatures and lean mixtures cause nitrogen dioxide to be formed.


Russell Bourke obtained British and Canadian patents for the engine in 1939: GB514842[26] and CA381959[27]

He also obtained an US Patent in 1939.[28]


  1. ^
  2. ^ The Most Powerful Diesel Engine in the World
  3. ^ best two strokes
  4. ^ Paul Niquette. "The Bourke Engine". Retrieved 2011-12-06. 
  5. ^ GS Baker "Ship Form, Resistance, and Screw Propulsion" p215
  6. ^ "Bourke Engine Com". Retrieved 2011-12-06. 
  7. ^
  8. ^ "Unbenannt-1" (PDF). Retrieved 2011-12-06. 
  9. ^ "aircraft engine development". Retrieved 2011-12-06. 
  10. ^ The Bourke Engine Project L.L.C. - Confirmed Test Results
  11. ^ Bourke Engine#Claimed and measured performance
  12. ^ JB Heywood "Internal Combustion Engine Fundamentals" ISBN 0-07-100499-8 pp240-245|Trade-off between efficiency, emissions and power
  13. ^ |Friction of seals
  14. ^ JB Heywood "Internal Combustion Engine Fundamentals" ISBN 0-07-100499-8 p723|Pumping losses
  15. ^ C Feyette Taylor "The Internal Combustion Engine" 4th edition, p194 para 2-3, p205 fig 124b, p258|Pumping losses in two strokes
  16. ^ C Feyette Taylor "The Internal Combustion Engine" 4th edition, p119|stresses due to detonation
  17. ^ Engine balance#Single-cylinder engines Balance of single-cylinder engines
  18. ^ JB Heywood "Internal Combustion Engine Fundamentals" ISBN 0-07-100499-8 p20|Importance of primary balance
  19. ^ JB Heywood "Internal Combustion Engine Fundamentals" ISBN 0-07-100499-8 pp240-245, p881|Scavenging ratio and low efficiency
  20. ^ JB Heywood "Internal Combustion Engine Fundamentals" ISBN 0-07-100499-8 pp240-245|Scavenging ratio effect on torque output
  21. ^ C Feyette Taylor "The Internal Combustion Engine" 4th edition p194 para5|Pumping losses in two strokes
  22. ^ JB Heywood "Internal Combustion Engine Fundamentals" ISBN 0-07-100499-8 p452-3|Increased thermal losses due to detonation
  23. ^ JB Heywood "Internal Combustion Engine Fundamentals" ISBN 0-07-100499-8 pp240-245, p881|Scavenging ratio and high emissions
  24. ^ "Science Links Japan | Effect of Piston Speed around Top Dead Center on Thermal Efficiency". 2009-03-18. Retrieved 2011-12-06. 
  25. ^ Hot bulb engine
  26. ^ "Espacenet - Bibliographic data". Retrieved 2013-01-21. 
  27. ^ "Espacenet - Bibliographic data". Retrieved 2013-01-21. 
  28. ^

External links

  • Running engine and Cad modeling
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.