World Library  
Flag as Inappropriate
Email this Article

Compressed air car

Article Id: WHEBN0000187473
Reproduction Date:

Title: Compressed air car  
Author: World Heritage Encyclopedia
Language: English
Subject: Compressed-air vehicle, Who Killed the Electric Car?, Electric car, Air Car, Aircar
Collection: Car Classifications, Compressed Air Power, Upcoming Automobile Models
Publisher: World Heritage Encyclopedia

Compressed air car

A compressed air car is a compressed air vehicle that uses a motor powered by compressed air. The car can be powered solely by air, or combined (as in a hybrid electric vehicle) with gasoline, diesel, ethanol, or an electric plant with regenerative braking.


  • Technology 1
    • Engines 1.1
    • Storage tanks 1.2
      • Energy density 1.2.1
  • Emissions 2
  • Advantages 3
  • Disadvantages 4
  • Crash safety 5
  • Developers and manufacturers 6
    • APUQ 6.1
    • MDI 6.2
    • Tata Motors 6.3
    • Air Car Factories SA 6.4
    • Energine 6.5
    • Kernelys 6.6
    • Engineair 6.7
    • Honda 6.8
    • Peugeot/Citroën 6.9
  • See also 7
  • References 8
  • External links 9



Compressed air cars are powered by motors driven by compressed air, which is stored in a tank at high pressure such as 30 MPa (4500 psi or 310 bar). Rather than driving engine pistons with an ignited fuel-air mixture, compressed air cars use the expansion of compressed air, in a similar manner to the expansion of steam in a steam engine.

There have been prototype cars since the 1920s, with compressed air used in torpedo propulsion.

Storage tanks

In contrast to hydrogen's issues of damage and danger involved in high-impact crashes, air, on its own, is non-flammable. It was reported on Seven Network's Beyond Tomorrow that on its own carbon-fiber is brittle and can split under sufficient stress, but creates no shrapnel when it does so. Carbon-fiber tanks safely hold air at a pressure somewhere around 4500 psi, making them comparable to steel tanks. The cars are designed to be filled up at a high-pressure pump.

Energy density

Compressed air has relatively low energy density. Air at 30 MPa (4,500 psi) contains about 50 Wh of energy per liter (and normally weighs 372g per liter). For comparison, a lead–acid battery contains 60-75 Wh/l. A lithium-ion battery contains about 250-620 Wh/l. The EPA estimates that a gallon of gasoline is equal to 33.7 kWh;[1] however, a typical gasoline engine with 18% efficiency can only recover the equivalent of 1694 Wh/l. The energy density of a compressed air system can be more than doubled if the air is heated prior to expansion.

In order to increase energy density, some systems may use gases that can be liquified or solidified. "CO2 offers far greater compressibility than air when it transitions from gaseous to supercritical form."[2]


Compressed air cars are emission-free at the exhaust. Since a compressed air car's source of energy is usually electricity, its total environmental impact depends on how clean the source of this electricity is. Different regions can have very different sources of power, ranging from high-emission power sources such as coal to zero-emission power sources such as wind. A given region can also change its electrical power sources over time, thereby improving or worsening total emissions.

However a study showed that even with very optimistic assumptions, air storage of energy is less efficient than chemical (battery) storage.[3]


The principal advantages of an air powered

  • It uses no gasoline or other bio-carbon based fuel.
  • Refueling may be done at home,[4] but filling the tanks to full pressure would require compressors for 250-300 bars, which are not normally available for home standard utilization, considering the danger inherent at these pressure levels. As with gasoline, service stations will eventually have the necessary air facilities. Those will use energy produced at large centralized powerplants, potentially making it less costly and more effective to manage emissions than from individual vehicles.
  • Compressed air engines reduce the cost of vehicle production, because there is no need to build a cooling system, spark plugs, starter motor, or mufflers.[5]
  • The rate of self-discharge is very low opposed to batteries that deplete their charge slowly over time. Therefore, the vehicle may be left unused for longer periods of time than electric cars.
  • Expansion of the compressed air lowers its temperature; this may be exploited for use as air conditioning.
  • Reduction or elimination of hazardous chemicals such as gasoline or battery acids/metals
  • Some mechanical configurations may allow energy recovery during braking by compressing and storing air.
  • Sweden's Lund University reports that buses could see an improvement in fuel efficiency of up to 60 percent using an air-hybrid system.[6] But this only refers to hybrid air concepts (due to recuperation of energy during braking), not compressed air-only vehicles.


The principal disadvantages are the additional steps of energy conversion and transmission, because each inherently has loss. For combustion engine cars, the energy is lost when chemical energy in fossil fuels is converted by the engine to mechanical energy. For electric cars, a power plant's electricity (from whatever source) is transmitted to the car's batteries, which then transmits the electricity to the car's motor, which converts it to mechanical energy. For compressed-air cars, the power plant's electricity is transmitted to a compressor, which mechanically compresses the air into the car's tank. The car's engine then converts the compressed air to mechanical energy.

Additional concerns:

  • When air expands in the engine it cools dramatically and must be heated to ambient temperature using a heat exchanger. The heating is necessary in order to obtain a significant fraction of the theoretical energy output. The heat exchanger can be problematic: while it performs a similar task to an intercooler for an internal combustion engine, the temperature difference between the incoming air and the working gas is smaller. In heating the stored air, the device gets very cold and may ice up in cool, moist climates.
  • This also leads to the necessity of completely dehydrating the compressed air. If any humidity subsists in the compressed air, the engine will stop due to inner icing. Removing the humidity completely requires additional energy that cannot be reused and is lost. (At 10g of water per m3 air -typical value in the summer- you have to take out 900 g of water in 90 m3; with a vaporization enthalpy of 2.26MJ/kg you will need theoretically minimally 0.6 kWh; technically, with cold drying this figure must be multiplied by 3 - 4. Moreover, dehydrating can only be done with professional compressors, so that a home charging will completely be impossible, or at least not at any reasonable cost.)
  • Conversely, when air is compressed to fill the tank, its temperature increases. If the stored air is not cooled while the tank is being filled, then when the air cools off later, its pressure decreases and the available energy decreases.
    To mitigate this, the tank may be equipped with an internal heat-exchanger in order to cool the air quickly and efficiently while charging.
    Alternatively, a spring may be used to store work from the air as it is inserted in the tank, thus maintaining a low pressure difference between the tank and recharger, which results in a lower temperature raise for the transferred air.
  • Refueling the compressed air container using a home or low-end conventional air compressor may take as long as 4 hours, though specialized equipment at service stations may fill the tanks in only 3 minutes.[4] To store 2.5 kWh @300 bar in 300 liter reservoirs (90 m3 of air @ 1 bar), requires about 30 kWh of compressor energy (with a single-stage adiabatic compressor), or approx. 21 kWh with an industrial standard multistage unit. That means a compressor power of 360 kW is needed to fill the reservoirs in 5 minutes from a single stage unit, or 250 kW for a multistage one.[7] However, intercooling and isothermal compression is far more efficient and more practical than adiabatic compression, if sufficiently large heat exchangers are fitted. Efficiencies of up to 65% might perhaps be achieved,[8] (whereas current efficiency for large industrial compressors is max. 50% ) however this is lower than the Coulomb's efficiency with lead acid batteries.
  • The overall efficiency of a vehicle using compressed air energy storage, using the above refueling figures, is around 5-7%.[9] For comparison, well to wheel efficiency of a conventional internal-combustion drivetrain is about 14%,[10]
  • Early tests have demonstrated the limited storage capacity of the tanks; the only published test of a vehicle running on compressed air alone was limited to a range of 7.22 km.[11]
  • A 2005 study demonstrated that cars running on lithium-ion batteries out-perform both compressed air and fuel cell vehicles more than threefold at the same speeds.[12] MDI claimed in 2007 that an air car will be able to travel 140 km in urban driving, and have a range of 80 km with a top speed of 110 km/h (68 mph) on highways,[13] when operating on compressed air alone, but in as late as mid-2011, MDI has still not produced any working prototype.
  • A 2009 University of Berkeley Research Letter found that "Even under highly optimistic assumptions the compressed-air car is significantly less efficient than a battery electric vehicle and produces more greenhouse gas emissions than a conventional gas-powered car with a coal intensive power mix." However, they also suggested, "a pneumatic–combustion hybrid is technologically feasible, inexpensive and could eventually compete with hybrid electric vehicles."[14]

Crash safety

Safety claims for light weight vehicle air tanks in severe collisions have not been verified. North American crash testing has not yet been conducted, and skeptics question the ability of an ultralight vehicle assembled with adhesives to produce acceptable crash safety results. Shiva Vencat, vice president of MDI and CEO of Zero Pollution Motors, claims the vehicle would pass crash testing and meet U.S. safety standards. He insists that the millions of dollars invested in the AirCar would not be in vain. To date, there has never been a lightweight, 100-plus mpg car which passed North American crash testing. Technological advances may soon make this possible, but the AirCar has yet to prove itself, and collision safety questions remain.[15]

The key to achieving an acceptable range with an air car is reducing the power required to drive the car, so far as is practical. This pushes the design towards minimizing weight.

According to a report by the U.S. Government's National Highway Traffic Safety Administration, among 10 different classes of passenger vehicles, "very small cars" have the highest fatality rate per mile driven. For instance, a person driving 12,000 miles per year for 55 years would have a 1% chance of being involved in a fatal accident. This is twice the fatality rate of the safest vehicle class, a "large car". According to the data in this report, the number of fatal crashes per mile is only weakly correlated with the vehicle weight, having a correlation coefficient of just (-0.45). A stronger correlation is seen with the vehicle size within its class; for example, "large" cars, pickups and SUVs, have lower fatality rates than "small" cars, pickups and SUVs. This is the case in 7 of the 10 classes, with the exception of mid-size vehicles, where minivans and mid-size cars are among the safest classes, while mid-size SUVs are the second most fatal after very small cars. Even though heavier vehicles sometimes are statistically safer, it is not necessarily the extra weight that causes them to be safer. The NHTSA report states: "Heavier vehicles have historically done a better job cushioning their occupants in crashes. Their longer hoods and extra space in the occupant compartment provide an opportunity for a more gradual deceleration of the vehicle, and of the occupant within the vehicle... While it is conceivable that light vehicles could be built with similarly long hoods and mild deceleration pulses, it would probably require major changes in materials and design and/or taking weight out of their engines, accessories, etc."[16]

Air cars may use low rolling resistance tires, which typically offer less grip than normal tires.[17][18] In addition, the weight (and price) of safety systems such as airbags, ABS and ESC may discourage manufacturers from including them.

Developers and manufacturers

Various companies are investing in the research, development and deployment of Compressed air cars. Overoptimistic reports of impending production date back to at least May 1999. For instance, the MDI Air Car made its public debut in South Africa in 2002,[19] and was predicted to be in production "within six months" in January 2004.[20] As of January 2009, the air car never went into production in South Africa. Most of the cars under development also rely on using similar technology to low-energy vehicles in order to increase the range and performance of their cars.


APUQ (Association de Promotion des Usages de la Quasiturbine) has made the APUQ Air Car, a car powered by a Quasiturbine.[21]


MDI has proposed a range of vehicles made up of AirPod, OneFlowAir, CityFlowAir, MiniFlowAir and MultiFlowAir.[22] One of the main innovations of this company is its implementation of its "active chamber", which is a compartment which heats the air (through the use of a fuel) in order to double the energy output.[23] This 'innovation' was first used in torpedoes in 1904.

Tata Motors

As of January 2009 Tata Motors of India had planned to launch a car with an MDI compressed air engine in 2011.[24][25] In December 2009 Tata's vice president of engineering systems confirmed that the limited range and low engine temperatures were causing problems.[26] Tata Motors announced in May 2012[27] that they have assessed the design passing phase 1, the "proof of the technical concept" towards full production for the Indian market. Tata has moved onto phase 2, "completing detailed development of the compressed air engine into specific vehicle and stationary applications".[28]

Air Car Factories SA

Air Car Factories SA is proposing to develop and build a compressed air engine.[29] This Spanish based company was founded by Miguel Celades. Currently there is a bitter dispute between Motor Development International, another firm called Luis which developed compressed-air vehicles, and Mr. Celades, who was once associated with that firm.[30][31]


The Energine Corporation was a South Korean company that claimed to deliver fully assembled cars running on a hybrid compressed air and electric engine. These cars are more precisely named pneumatic-hybrid electric vehicles.[32] Engineers from this company made, starting from a Daewoo Matiz, a prototype of a hybrid electric/compressed-air engine (Pne-PHEV, pneumatic plug-in hybrid electric vehicle). The compressed-air engine is used to activate an alternator, which extends the autonomous operating capacity of the car.

The CEO of Energine was reportedly arrested for fraud.[33]

A similar concept using a pneumatic accumulator in a largely hydraulic system has been developed by U.S. government research laboratories and industry. It uses compressed air only for recovery of braking energy, and in 2007 was introduced for certain heavy vehicle applications such as refuse trucks.[34]


The "K'Airmobiles" project of Kernelys[35][36] aimed to produce commercial vehicles in France. The project was started in 2006-2007 by a small group of researchers. They said to be working on 2 types of vehicles; namely "VPA" (Vehicles with Pneumatic Assistance) and "VPP" (Vehicles with Pneumatic Propulsion) vehicles.[37] However, the project has in the end not been able to gather the necessary funds to go commercial.

People should note that, meantime, the team has recognized the physical impossibility to use on-board stored compressed air due to its poor energy capacity and the thermal losses resulting from the expansion of the gas.[38]

These days, using the patent pending 'K'Air Fluid Generator', converted to work as a compressed-gas motor, the company has reworked its project in 2010 together with a North American group of investors, now intended for the purpose of developing a green energy power system.[39]


Engineair is an Australian company which manufactures small industrial vehicles using an air engine of its own design.[40]


PSA Peugeot Citroën Hybrid Air concept exhibited at the 2013 Geneva Motor Show.

In 2010, Honda presented the Honda Air concept car at the LA Auto Show.[41]


Peugeot and Citroën have announced that they too are building a car that uses compressed air as an energy source. However, the car they are designing uses a hybrid system which also uses a gasoline engine (which is used for propelling the car over 70 km/h, or when the compressed air tank has been depleted).[42][43]

See also


  1. ^ Bowlin, Ben. "How to Convert Gasoline Energy to Kilowatt-hours (kWh) ", Retrieved on 7 January 2015.
  2. ^ Oldenburg, Curtis M. (2003). "Carbon Dioxide as Cushion Gas for Natural Gas Storage". Energy & Fuels 17: 240.  
  3. ^ Lucas, Paul (December 14, 2009). "Air cars under testing but are they efficient?". 
  4. ^ a b "Car runs on compressed air, but will it sell?". Associated Press. October 4, 2004. Retrieved 2008-09-12. 
  5. ^ [ "Advantages of compressed air as an energy vector"] . Retrieved 2008-09-16. 
  6. ^ "Air hybrid vehicles could halve fuel consumption in future".  
  7. ^ "SCA650E43/HDF-SILENT SeaComAir Silent 23 cfm 11 kW Electric Motor 400V/50Hz or 60Hz Three phase". 
  8. ^ Bossel, Ulf (April 2, 2009). "Thermodynamic Analysis of Compressed Air Vehicle Propulsion" (PDF). 
  9. ^ "The Fuel of the Future". Australian Science. Retrieved 30 May 2015. 
  10. ^ "Comparing Apples to Apples: Well-to-Wheel Analysis of Current ICE and Fuel Cell Vehicle Technologies, p.15" (PDF). Argonne National laboratory. 
  11. ^ Sebastian Braud (2007-03-21). "MDI refilling stations". Archived from the original on 2007-03-21. Retrieved 2010-12-12. 
  12. ^ Patrick Mazza; Roel Hammerschlag. "Wind-to-Wheel Energy Assessment" (PDF). Institute for Lifecycle Environmental Assessment. Retrieved 2008-09-12. 
  13. ^ "MDI Enterprises S.A". Retrieved 2010-12-12. 
  14. ^ Creutzig, Felix; Papson, Andrew; Schipper, Lee; Kammen, Daniel M (2009). "Economic and environmental evaluation of compressed-air cars". Environmental Research Letters 4 (4): 044011.  
  15. ^ Pawlowski, A. (August 8, 2008). "106 mpg 'air car' creates buzz, questions". CNN. Retrieved 2009-04-25. 
  16. ^ Kahane, Charles J. (October 2003). "Vehicle Weight, Fatality Risk and Crash Compatibility of Model Year 1991-99 Passenger Cars and Light Trucks Report" (PDF).  
  17. ^ "Low-rolling-resistance tires".  
  18. ^ "Planned EU Requirements for Tires Would Reduce Road Traffic Safety".  
  19. ^ Kevin Bonsor (2005-10-25). "How Air-Powered Cars Will Work".  
  20. ^ Robyn Curnow (2004-01-11). "Gone with the wind". London:  
  21. ^ "Association de Promotion des Usages de la Quasiturbine". APUQ. Retrieved 2012-01-26. 
  22. ^ Learn everything about the compressed air cars!,
  23. ^ "MDI's active chamber". Retrieved 2010-12-12. 
  24. ^ "Tata Air Car to drive in by 2011".  
  25. ^ "An engine which uses air as fuel: Tata Motors and technology inventor, MDI of France, sign agreement" (Press release).  
  26. ^ TaMo’s ambitious ‘Air Car’ faces starting trouble
  27. ^ "MDI's air engine technology tested on Tata Motors vehicles" (Press release).  
  28. ^ Tata Motors enters second phase of air-car development, 2012-05-07
  29. ^ [ "The Air Car"] . Retrieved 2008-09-12. 
  30. ^ [ "WARNING"] .  
  31. ^ [ "CLARIFICATION"] . Retrieved 2008-09-12. 
  32. ^ US patent 7028482, Cho, Chol-Seung & Ko, Dae-Sik, "Phev (pneumatic hybrid electric vehicle)", published December 2, 2004 
  33. ^ Digital Chosunilbo (English Edition) : Daily News in English About Korea
  34. ^ "Bosch Rexroth Named Subcontractor for Hydraulic Hybrid Refuse Truck Field Test" (Press release). Bosch Rexroth Corporation. May 16, 2007. Retrieved June 15, 2012. 
  35. ^ "others". Retrieved 30 May 2015. 
  36. ^ Kernelys' K'airmobiles site, now password protected
  37. ^ Besant. "Beso". Retrieved 30 May 2015. 
  38. ^ K'airmobiles engineers ultimately admitting that the inherent efficiency and low-running-temperature problems made the project unfeasible
  39. ^ "K°Air Energy Inc.". Retrieved 30 May 2015. 
  40. ^ Matt Campbell (November 3, 2011). "The motorbike that runs on air".  
  41. ^ "Honda Air concept car". 2010-10-22. Retrieved 2012-01-26. 
  42. ^ "Compressed-Air Hybrid Car Developed". 2013-02-18. Retrieved 2013-09-08. 
  43. ^ Marc Carter. "Peugeot Announces Plans to Release a Hybrid Car That Runs on Compressed Air by 2016". Retrieved 30 May 2015. 

External links

  • Fairley, Peter (November 2009). "Deflating the Air Car".  
  • "Scuderi Group to Present Preliminary Results on Air-Hybrid Study and Update on Scuderi Engine Prototype Testing at Washington Auto Show". Green Car Congress. BioAge Group. January 16, 2010. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.