World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0000306685
Reproduction Date:

Title: Deflagration  
Author: World Heritage Encyclopedia
Language: English
Subject: Explosive material, Largest artificial non-nuclear explosions, Detonation, Deflagration to detonation transition, Cordite
Collection: Explosives
Publisher: World Heritage Encyclopedia


A log in a fireplace.

Deflagration (Lat: de + flagrare, "to burn down") is a term describing subsonic combustion propagating through heat transfer; hot burning material heats the next layer of cold material and ignites it. Most "fire" found in daily life, from flames to explosions, is deflagration. Deflagration is different from detonation, which propagates supersonically through shock waves.


  • Applications 1
  • Oil/wax fire and water 2
  • Flame physics 3
  • Damaging deflagration events 4
  • See also 5
  • References 6


In engineering applications, deflagrations are easier to control than detonations. Consequently, they are better suited when the goal is to move an object (a bullet in a gun, or a piston in an internal combustion engine) with the force of the expanding gas. Typical examples of deflagrations are the combustion of a gas-air mixture in a gas stove or a fuel-air mixture in an internal combustion engine, and the rapid burning of gunpowder in a firearm or of pyrotechnic mixtures in fireworks. Deflagration systems and products can also be used in mining, demolition and stone quarrying via gas pressure blasting as a beneficial alternative to high explosives.

Oil/wax fire and water

Adding water to a burning hydrocarbon such as oil or wax produces a deflagration. The water boils rapidly and ejects the burning material as a fine spray of droplets. A deflagration then occurs as the fine mist of oil ignites and burns extremely rapidly. These are particularly common in chip pan fires, which are responsible for one in five household fires in Britain.[1]

Flame physics

The underlying flame physics can be understood with the help of an idealized model consisting of a uniform one-dimensional tube of unburnt and burned gaseous fuel, separated by a thin transitional region of width \delta\; in which the burning occurs. The burning region is commonly referred to as the flame or flame front. In equilibrium, thermal diffusion across the flame front is balanced by the heat supplied by burning.

There are two characteristic timescales which are important here. The first is the thermal diffusion timescale \tau_d\;, which is approximately equal to

\tau_d \simeq \delta^2 / \kappa,

where \kappa \; is the thermal diffusivity. The second is the burning timescale \tau_b that strongly decreases with temperature, typically as

\tau_b\propto \exp[\Delta U/(k_B T_f)],

where \Delta U\; is the activation barrier for the burning reaction and T_f\; is the temperature developed as the result of burning; the value of this so-called "flame temperature" can be determined from the laws of thermodynamics.

For a stationary moving deflagration front, these two timescales must be equal: the heat generated by burning is equal to the heat carried away by heat transfer. This makes it possible to calculate the characteristic width \delta\; of the flame front:

\tau_b = \tau_d\;,


\delta \simeq \sqrt {\kappa \tau_b} .

Now, the thermal flame front propagates at a characteristic speed S_l\;, which is simply equal to the flame width divided by the burn time:

S_l \simeq \delta / \tau_b \simeq \sqrt {\kappa / \tau_b} .

This simplified model neglects the change of temperature and thus the burning rate across the deflagration front. This model also neglects the possible influence of turbulence. As a result, this derivation gives only the laminar flame speed -- hence the designation S_l\;.

Damaging deflagration events

Damage to buildings, equipment and people can result from a large-scale, short-duration deflagration. The potential damage is primarily a function of the total amount of fuel burned in the event (total energy available), the maximum flame velocity that is achieved, and the manner in which the expansion of the combustion gases is contained.

In free-air deflagrations, there is a continuous variation in deflagration effects relative to the maximum flame velocity. When flame velocities are low, the effect of a deflagration is to release heat. Some authors use the term flash fire to describe these low-speed deflagrations. At flame velocities near the speed of sound, the energy released is in the form of pressure and the results resemble a detonation. Between these extremes both heat and pressure are released.

When a low-speed deflagration occurs within a closed vessel or structure, pressure effects can produce damage due to expansion of gases as a secondary effect. The heat released by the deflagration causes the combustion gases and excess air to expand thermally. The net result is that the volume of the vessel or structure must expand to accommodate the hot combustion gases, or the vessel must be strong enough to withstand the additional internal pressure, or it fails, allowing the gases to escape. The risks of deflagration inside waste storage drums is a growing concern in storage facilities.

See also


  1. ^ UK Fire Service advice on chip pan fires
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.