World Library  
Flag as Inappropriate
Email this Article

Fresnel Imager

Article Id: WHEBN0024279120
Reproduction Date:

Title: Fresnel Imager  
Author: World Heritage Encyclopedia
Language: English
Subject: Spektr-UV, MAXI (ISS Experiment), Hakucho, Telescope for Habitable Exoplanets and Interstellar/Intergalactic Astronomy, Eddington (spacecraft)
Publisher: World Heritage Encyclopedia

Fresnel Imager

A Fresnel imager is a proposed ultra-lightweight design for a space telescope that uses a Fresnel array as primary optics instead of a typical lens. It focuses light with a thin opaque foil sheet punched with specially shaped holes, thus focusing light on a certain point by using the phenomenon of diffraction. Such patterned sheets, called Fresnel zone plates, have long been used for focusing laser beams, but have so far not been used for astronomy. No optical material is involved in the focusing process as in traditional telescopes. Rather, the light collected by the Fresnel array is concentrated on smaller classical optics (e.g. 1/20th of the array size), to form a final image.[1]

The long focal lengths of the Fresnel imager (a few kilometers)[2][3] require operation by two-vessel formation flying in space at the L2 Sun-Earth Lagrangian point.[1] In this two spacecraft formation-flying instrument, one spacecraft holds the focussing element: the Fresnel interferometric array; the other spacecraft holds the field optics, focal instrumentation, and detectors.[4][5]


  • A Fresnel imager with a sheet of a given size has vision just as sharp as a traditional telescope with a mirror of the same size, though it collects about 10% of the light.[6][7]
  • The use of vacuum for the individual subapertures eliminates phase defects and spectral limitations, which would result from the use of a transparent or reflective material.[6]
  • It can observe in the ultraviolet and infrared, in addition to visible light.[7]
  • It achieves images of high contrast, enabling observation of a very faint object in the close vicinity of a bright one.[7]
  • Since it is constructed using foil instead of mirrors, it is expected to be more lightweight, and therefore less expensive to launch, than a traditional telescope.[3]
  • A 30-metre Fresnel imager would be powerful enough to see Earth-sized planets within 30 light years of Earth, and measure the planets' light spectrum to look for signs of life, such as atmospheric oxygen. The Fresnel imager could also measure the properties of very young galaxies in the distant universe and take detailed images of objects in our own solar system.[3]


The concept has been successfully tested in the visible, and awaits testing in the UV. An international interest group is being formed, with specialists of the different science cases. A proposal for a 2025-2030 mission has been submitted to ESA Cosmic Vision call.[4][6] In 2008 Laurent Koechlin of the Observatoire Midi-Pyrénées in Toulouse, France, and his team planned to construct a small ground-based Fresnel imager telescope by attaching a 20-centimetre patterned sheet to a telescope mount.[3]

Koechlin and his team completed the ground-based prototype in 2012. It uses a piece of copper foil 20 cm square with 696 concentric rings as the zone plate. Its focal length is 18 metres. They were able to resolve the moons of Mars from the parent planet with it.[8]

See also


  1. ^ a b
  2. ^
  3. ^ a b c d
  4. ^ a b
  5. ^
  6. ^ a b c
  7. ^ a b c
  8. ^ Twinkle, twinkle, little planet , The Economist , Jun 9, 2012. Accessed June 2012.

Further reading

  • The Fresnel Interferometric Imager, Proposal to ESA Cosmic Vision 2007
  • Fresnel interferometric Arrays as Imaging interferometers, L.Koechlin, D.Serre, P.Deba, D.Massonnet
  • High resolution imaging with Fresnel interferometric arrays: suitability for exoplanet detection, L. Koechlin, D. Serre, and P. Duchon
  • Imageur de Fresnel pour observations à haute Résolution Angulaire et haute dynamique, L.Koechlin, D.Serre, P.Deba
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.