World Library  
Flag as Inappropriate
Email this Article

Gnome Monosoupape

Article Id: WHEBN0000717555
Reproduction Date:

Title: Gnome Monosoupape  
Author: World Heritage Encyclopedia
Language: English
Subject: Le Rhône 9C, Le Rhône 9J, Sopwith Pup, Avro 504, Gnome-Rhône 9K
Collection: Aircraft Piston Engines 1910–1919, Gnome-Rhône Aircraft Engines, Rotary Aircraft Piston Engines
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Gnome Monosoupape

Monosoupape
A 1917 Gnome 9N 160 hp Monosoupape rotary engine, with dual ignition provision (twin spark plugs per cylinder)
Type Rotary aero engine
National origin France
Manufacturer Gnome et Rhône
First run 1913
Major applications Avro 504
Sopwith Camel

The Monosoupape (French for single-valve), was a rotary engine design first introduced in 1913 by Gnome Engine Company (renamed Gnome et Rhône in 1915). It used a clever arrangement of internal transfer ports and a single pushrod-operated exhaust valve to replace a large number of moving parts found on more conventional rotary engines, and made the Monosoupape engines some of the most reliable of the era. British aircraft designer Thomas Sopwith described the Monosoupape as "one of the greatest single advances in aviation".[1]

Produced under license in both seven and nine-cylinder versions in large numbers in most industrialized countries including Germany (by Oberursel), Russia, Italy, Britain and the US. The nine-cylinder version was produced with two different displacements.

Contents

  • Background 1
  • Description 2
    • Control 2.1
    • Lubrication 2.2
  • Variants 3
  • Applications 4
    • Monosoupape 7 4.1
    • Monosoupape 9 Type B-2 4.2
    • Monosoupape 9 Type N 4.3
  • Engines on display 5
  • Specifications (Monosoupape 9 Type B-2) 6
  • See also 7
  • References 8
    • Notes 8.1
    • Bibliography 8.2
  • External links 9

Background

Contrary to the Le Rhône designs, the early Gnome engines like the Gnome Omega, Lambda and Delta used a unique arrangement of valves in order to avoid needing pushrods and other complex devices that operated during the inlet phase of the combustion cycle on more conventional engines. Instead, a single exhaust valve on the cylinder head was operated by a pushrod that opened the valve when the pressure dropped at the end of the power stroke. A pressure-operated inlet valve, which was balanced by a counterweight to equalize the centrifugal forces, was placed in the centre of the piston crown, where it opened to allow the fuel–air charge to enter from the engine's central crankcase.

Although ingenious, the system had several drawbacks: the cylinder heads had to be removed both in order to perform maintenance of the intake valve, which could easily become jammed, and in order to adjust the timing and pressures correctly for the rod-less operation; and the Gnomes exhibited poorer fuel economy than other rotaries because the inlet valves could not be opened and closed at the ideal times.

Description

In 1913, Louis Seguin and his brother Laurent (engineers who founded the Société Des Moteurs Gnome [the Gnome motor company] in 1905) introduced the new Monosoupape series, which eliminated the inlet valve, replacing it with piston-controlled transfer ports similar to those found in a two-stroke engine. Beginning with the power stroke, the four-stroke engine operated normally until the piston was just about to reach the bottom of its stroke (bottom dead center, or BDC), when the exhaust valve was opened "early". This let the still-hot burnt combustion gases "pop" out of the engine while the piston was still moving down, relieving exhaust pressure and preventing exhaust gases from entering the crankcase. After a small additional amount of travel, the piston uncovered 36 small ports around the base of the cylinder, leading to the crankcase which held additional fuel–air mixture (the charge). No transfer took place at this point since there was no pressure differential; the cylinder was still open to the air and thus at ambient pressure. The overhead valve exhausted directly into the slipstream since no exhaust manifold could be practically fitted to the spinning crankcase and cylinders, partly in order to save weight and prevent excessive amounts of centrifugal forces in flight.

During the exhaust stroke, total scavenging occurred as the air moving past the cylinder exterior lowered the pressure inside due to the direct exposure of the exhaust port to the slipstream. The piston continued its exhaust stroke until top dead center (TDC) was reached, but the valve did not close. The piston began to move down on its intake stroke with the valve still open, pulling fresh (presumably un-filtered) air into the cylinder. It remained open until it was two-thirds of the way down, at which point the valve closed and the remainder of the intake stroke greatly reduced the air pressure. When the piston uncovered the transfer ports again, the low pressure in the cylinder drew in the balance of the charge.

The charge was an overly rich mixture of air, which was acquired through the hollow crankshaft, and fuel that was continuously injected by a fuel nozzle on the end of a fuel line, entering the crankcase through the hollow crankshaft. The nozzle was in the proximity of, and aimed at, the inside base of the cylinder where the transfer ports were located. The fuel nozzle was stationary with the crankshaft, and the cylinders rotated into position in turn. The compression stroke was conventional.

The spark plug was installed horizontally into the rear of the cylinder at the top but had no connecting high-voltage wire. An internal-tooth ring gear mounted on the engine drove a stationary magneto mounted on the firewall, whose high-voltage output terminal was in close proximity to the spark plug terminals as they passed by. This arrangement eliminated the need for points, distributor, high-voltage wiring and capacitors found in conventional mechanically timed ignition systems. This ring gear also drove the oil pump, which supplied oil to all bearings, and through hollow pushrods to the rockers and valves and also drove an air pump which pressurized the fuel tank. The later, 160 CV Gnome 9N engines had dual ignition systems for safety, with twin spark plugs per cylinder which were electrically wired, with the wires routed onto the crankcase and a central pair of magnetos driven by the spinning engine crankcase.

Control

The Monosoupape had no carburetor or throttle, and since most of its air supply was taken in through the exhaust valve, it could not be controlled by adjusting the air supply to the crankcase like other rotaries. Monosoupapes therefore had a single petrol regulating control used for a limited degree of speed regulation. In early examples, engine speed could be controlled by varying the opening time and extent of the exhaust valves using levers acting on the valve tappet rollers, but this was later abandoned due to causing burning of the valves.[2] Instead, a blip switch was used, which cut out the ignition when pressed. This was used sparingly to avoid damaging the engine, since it was only safe to be used when the fuel supply was also cut. Some later Monosoupapes were fitted with a selector switch which allowed the pilot to cut out three or six cylinders instead of all nine when hitting the blip switch, so that each cylinder fired only once per three engine revolutions but the engine remained in perfect balance.[3]

Lubrication

The Sopwith Tabloid replica shows the example of casing used to protect from the oil sprayed by the rotating engine.

The lubrication system, as with all rotary engines, was a total-loss type in which castor oil was injected into the fuel–air mix with a small pump. Castor oil was used because it could not be easily dissolved into the fuel, and because it possessed lubrication qualities superior to mineral oils of the day. Over two gallons of castor oil were sprayed into the air during each hour of engine operation. This explains why most rotaries were fitted with a roughly 270° perimeter "horseshoe"-shape ring cowl, with the lowermost quarter of the cowl omitted to be open at the bottom. The cowl directed the spray of castor oil, along with sparks from the exhaust, away from the flammable aircraft structure.[2] Unburnt castor oil from the engine tended to be hurled into the pilot's face, often having a laxative effect on the pilot if ingested.[3]

Because the entire engine rotated, it had to be precisely balanced, requiring precision machining of all parts. As a result, Monosoupapes were extremely expensive to build, the 100 horsepower (75 kW) models costing $4,000 in 1916 (approx. $87,000 in 2014 dollars). However, they weighed slightly less than the earlier two-valve engines and also used less lubricating oil.[4]

Variants

Gnome Monosoupape 7 Type A
(1916) Seven-cylinder rotary engine, 80 hp (60 kW). Bore and stroke: 110 x 150 mm (4.3 x 5.9 in).
Gnome Monosoupape 9 Type B-2
(1916) Nine-cylinder rotary engine, 100 hp (75 kW). Bore and stroke: 110 x 150 mm (4.3 x 5.9 in). 2,188 units produced under license in Britain.
Gnome Monosoupape 9 Type N
(1917) Nine-cylinder rotary engine, larger diameter crankcase than the B-2, 150 or 160 hp (112 or 119 kW). Bore and stroke: 115 x 170 mm (4.5 x 6.7 in).

Applications

List from Lumsden.

Monosoupape 7

Monosoupape 9 Type B-2

Monosoupape 9 Type N

Engines on display

  • There is a restored B-2 Monosoupape on display at the New England Air Museum, Bradley Int'l Airport, Windsor Locks, CT, USA.[6]
  • TAVAS in Australia have two. http://www.tavas.com.au/rotary-engine.php Both for exhibition in flying aircraft.

Specifications (Monosoupape 9 Type B-2)

Data from Lumsden.

General characteristics

  • Type: 9-cylinder, single-row, rotary engine
  • Bore: 110 mm (4.3 in)
  • Stroke: 150 mm (5.9 in)
  • Displacement: 12.8 L (781.63 cu in)
  • Length: 107.4 cm (42.3 in)
  • Diameter: 95 cm (37.4 in)
  • Dry weight: 137.4 kg (303 lb)

Components

  • Valvetrain: Single overhead valve with cylinder ports
  • Fuel type: 40-50 Octane petrol
  • Oil system: Total loss, castor oil
  • Cooling system: Air-cooled
  • Reduction gear: Direct drive, right-hand tractor, left-hand pusher

Performance

  • Power output: 86 kW (115 hp) at 1,300 rpm (Maximum power)
  • Compression ratio: 4.85:1

See also

Comparable engines
Related lists

References

Notes

  1. ^ Nahum, Andrew (1999). The Rotary Aero Engine. NMSI Trading Ltd.  
  2. ^ Gnome Monosoupape Type N Rotary Retrieved on 18 February 2009.
  3. ^ Setright, IJK (1971). The Power to Fly : The Development of the Piston Engine in Aviation. Allen and Unwin. p. 27.  
  4. ^ Vivian, E. Charles (2004). A History of Aeronautics. Kessinger Publishing. p. 255.  
  5. ^ video
  6. ^ http://neam.org/index.php?option=com_content&view=article&layout=edit&id=1103
  • McCutcheon, Kimble D. "Gnome Monosoupape Type N Rotary" (PDF). Aircraft Engine Historical Society. Retrieved 2008-05-01. 

Bibliography

  • Lumsden, Alec. British Piston Engines and their Aircraft. Marlborough, Wiltshire: Airlife Publishing, 2003. ISBN 1-85310-294-6.

External links

  • Rattling of a Gnome engine
  • in AustraliaMonosoupapeGround run of a rare 100 hp
  • demonstrationMonosoupapeYouTube video of 100 hp Gnome
  • Modern reproduction Fokker D VIII powered with 160 hp Gnome Monosoupape
  • New Zealand-built (21st century) reproduction Type 9B-2 100 hp Monosoupape running
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.