World Library  
Flag as Inappropriate
Email this Article

Graduated cylinder

Article Id: WHEBN0000106304
Reproduction Date:

Title: Graduated cylinder  
Author: World Heritage Encyclopedia
Language: English
Subject: Laboratory glassware, Conical measure, Pipette, Relative density, Test tube
Collection: Laboratory Glassware, Volumetric Instruments
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Graduated cylinder

graduated cylinder

A graduated cylinder, measuring cylinder or mixing cylinder is a common piece of laboratory equipment used to measure the volume of a liquid. It has a narrow cylindrical shape. Each marked line on the graduated cylinder represents the amount of liquid that has been measured.

Contents

  • Materials & Structure 1
  • Common uses 2
  • Reading 3
  • References 4

Materials & Structure

different types of graduated cylinder: 10ml, 25ml, 50ml and 100ml graduated cylinder
A diagram of two upright, unstoppered cylinders with wide bases and horizontal graduations
Two graduated cylinders

Large graduated cylinders are usually made up of polypropylene for its excellent chemical resistance or polymethylpentene for its transparency, making them lighter and less fragile than glass. Polypropylene (PP) is easy to repeatedly autoclave; however, autoclaving in excess of about 121 °C (250 °F) (depending on the chemical formulation: typical commercial grade polypropylene melts in excess of 177 °C (351 °F)), can warp or damage polypropylene graduated cylinders, affecting accuracy.[1]

I H N traditional graduated cylinder (A in the image) is usually narrow and tall so as to increase the accuracy and precision of volume measurement; it has a plastic or glass bottom and a "spout" for easy pouring of the measured liquid. An additional version is wide and low.

Mixing cylinders (B in the picture) have ground glass joints instead of a spout, so they can be closed with a stopper or connect directly with other elements of a manifold.[2] With this kind of cylinder, the metered liquid does not pour directly, but is often removed using a cannula. A graduated cylinder is meant to be read with the surface of the liquid at eye level, where the center of the meniscus shows the measurement line. Typical capacities of graduated cylinders are from 10 ml to 1000 ml.

Common uses

Graduated cylinders are often used to measure the volume of a liquid. Graduated cylinders are generally more accurate and precise than laboratory flasks and beakers, but they should not be used to perform volumetric analysis;[3] volumetric glassware, such as a volumetric flask or volumetric pipette, should be used, as it is even more accurate and precise. Graduated cylinders are sometimes used to measure the volume of a solid indirectly by measuring the displacement of a liquid.

Reading

To be able to read volume measured by graduated cylinder, 3 significant digits were used. Also, in order to read the volume accurately, the observation must be at an eye level and read at the bottom of a meniscus of the liquid level.[4] Referred to the picture on the right side of the page, 100ml graduated cylinder was used to measure the liquid. It was found that 60ml volume of the liquid was measured.
60ml volume measured by graduated cylinder

References

  1. ^
  2. ^ http://www.elementalscientific.net/store/scripts/prodView.asp?idproduct=1239
  3. ^
  4. ^


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.