World Library  
Flag as Inappropriate
Email this Article

IEEE 802.11ah

Article Id: WHEBN0040369184
Reproduction Date:

Title: IEEE 802.11ah  
Author: World Heritage Encyclopedia
Language: English
Subject: IEEE 802.11, IEEE 802.11af, IEEE 802.11y-2008, IEEE 802.15, IEEE 1667
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

IEEE 802.11ah

IEEE 802.11ah is a wireless networking protocol that is an amendment of the IEEE 802.11-2007 wireless networking standard. It utilizes sub 1 GHz license-exempt bands to provide extended range Wi-Fi networks, compared to conventional Wi-Fi networks operating in the 2.4 GHz and 5 GHz bands. It also benefits from lower energy consumption, allowing the creation of large groups of stations or sensors that cooperate to share the signal, supporting the concept of the Internet of Things (IoT).[1]

The standard is expected to be finalized and arrive in 2016, with chips and systems based on 802.11ah hitting the market as early as 2015.[2]

Description

A benefit of 802.11ah is extended range, making it useful for rural communications and offloading cell phone tower traffic.[2] The other purpose of the protocol is to allow low rate 802.11 wireless stations to be used in the sub-gigahertz spectrum.[1] The protocol is one of the IEEE 802.11 technologies which is the most different from the LAN model, especially concerning medium contention. A prominent aspect of 802.11ah is the behaviour of stations that are grouped to minimize contention on the air media, use relay to extend their reach, use little power thanks to predefined wake/doze periods, are still able to send data at high speed under some negotiated conditions and use sectored antennas. It uses the 802.11a/g specification that is down sampled to provide 26 channels, each of them able to provide 100 kbit/s throughput. It can cover a one-kilometer area. It aims at providing connectivity to thousands of devices under an access point. The protocol supports machine to machine (M2M) markets, like smart metering. [3]

Relay Access Point (AP)

A Relay is an entity that logically consists of an Relay AP and a networking station (STA), or client. The relay function allows an AP and stations to exchange frames with one another by the way of a relay. The introduction of a relay allows stations to use higher MCSs (Modulation and Coding Schemes) and reduce the time stations will stay in Active mode. This improves battery life of stations. Relay stations may also provide connectivity for stations located outside the coverage of the AP. There is an overhead cost on overall network efficiency and increased complexity with the use of relay stations. To limit this overhead, the relaying function shall be bi-directional and limited to two hops only.

Power saving

Power saving stations are divided into two classes: TIM stations and non-TIM stations. TIM stations periodically receive information about buffered traffic for them from the access point in so-called TIM information element, hence the name. Non-TIM stations use the new Target Wake Time mechanism which allows to reduce signaling overhead. [4]

Target Wake Time

Target Wake Time (TWT) is a function that permits an AP to define a specific time or set of times for individual stations to access the medium. The STA (client) and the AP exchange information that includes an expected activity duration to allow the AP to control the amount of contention and overlap among competing STA. The AP can protect the expected duration of activity with various protection mechanisms. The use of TWT is negotiated between an AP and a STA. Target Wake Time may be used to reduce network energy consumption, as stations that use it can enter a doze state until their TWT arrives.

Restricted Access Window

Restricted Access Window allows partitioning of the stations within a Basic Service Set (BSS) into groups and restricting channel access only to stations belonging to a given group at any given time period. It helps to reduce contention and to avoid simultaneous transmissions from a large number of stations hidden from each other. [5]

Bi Directional TXOP

Bi Directional TXOP allows an AP and non-AP (STA or client) to exchange a sequence of uplink and downlink frames during a reserved time (transmit opportunity or TXOP). This operation mode is intended to reduce the number of contention-based channel accesses, improve channel efficiency by minimizing the number of frame exchanges required for uplink and downlink data frames, and enable stations to extend battery lifetime by keeping Awake times short. This continuous frame exchange is done both uplink and downlink between the pair of stations. In earlier versions of the standard Bi Directional TXOP was called Speed Frame Exchange. [6]

Sectorization

The partition of the coverage area of a Basic Service Set (BSS) into sectors, each containing a subset of stations, is called sectorization. This partitioning is achieved through a set of antennas or a set of synthesized antenna beams to cover different sectors of the BSS. The goal of the sectorization is to reduce medium contention or interference by the reduced number of stations within a sector and/or to allow spatial sharing among overlapping BSS (OBSS) APs or stations.

Comparison

IEEE 802.af which uses lower frequencies, offers better penetration through walls etc than than IEEE 802.ah.

See also

IEEE 802.11 network standards

802.11 network PHY standards
802.11
protocol
Release
date[7]
Fre-
quency
Band-
width
Stream data rate[8] Allowable
MIMO streams
Modulation Approximate
range
Indoor Outdoor
(GHz) (MHz) (Mbit/s) (m) (ft) (m) (ft)
802.11-1997 Jun 1997 2.4 22 1, 2 N/A DSSS, FHSS 20 66 100 330
a Sep 1999 5 20 6, 9, 12, 18, 24, 36, 48, 54 N/A OFDM 35 115 120 390
3.7[A] 5,000 16,000[A]
b Sep 1999 2.4 22 1, 2, 5.5, 11 N/A DSSS 35 115 140 460
g Jun 2003 2.4 20 6, 9, 12, 18, 24, 36, 48, 54 N/A OFDM 38 125 140 460
n Oct 2009 2.4/5 20 7.2, 14.4, 21.7, 28.9, 43.3, 57.8, 65, 72.2 [B]
(6.5, 13, 19.5, 26, 39, 52, 58.5, 65) [C]
4 OFDM 70 230 250 820[9]
40 15, 30, 45, 60, 90, 120, 135, 150 [B]
(13.5, 27, 40.5, 54, 81, 108, 121.5, 135) [C]
70 230 250 820[9]
ac Dec 2013 5 20 7.2, 14.4, 21.7, 28.9, 43.3, 57.8, 65, 72.2, 86.7, 96.3 [B]
(6.5, 13, 19.5, 26, 39, 52, 58.5, 65, 78, 86.7) [C]
8 35 115[10]
40 15, 30, 45, 60, 90, 120, 135, 150, 180, 200 [B]
(13.5, 27, 40.5, 54, 81, 108, 121.5, 135, 162, 180) [C]
35 115[10]
80 32.5, 65, 97.5, 130, 195, 260, 292.5, 325, 390, 433.3 [B]
(29.2, 58.5, 87.8, 117, 175.5, 234, 263.2, 292.5, 351, 390) [C]
35 115[10]
160 65, 130, 195, 260, 390, 520, 585, 650, 780, 866.7 [B]
(58.5, 117, 175.5, 234, 351, 468, 702, 780) [C]
35 115[10]
ad Dec 2012 60 2,160 Up to 6,912 (6.75 Gbit/s) [11] N/A OFDM, single carrier,
low-power single carrier
60 200 100 300
ah Est. 2016[7] 0.9
aj Est. 2016[7] 45/60
ax Est. 2019[7] 2.4/5 MIMO-OFDM
ay 2017 60 8000 Up to 100 (100 Gbit/s) 4 OFDM, single carrier,
60 200 1000 3000

References

  1. ^ a b
  2. ^ a b
  3. ^ AustPrasadNiemegeers 2012.
  4. ^ SunChoiChoi 2013, p. 43, 5.2 Power Saving.
  5. ^ KhorovLyakhovKrotovGuschin 2014, 4.3.2. Restricted Access Window.
  6. ^ KhorovLyakhovKrotovGuschin 2014, 4.3.1. Virtual carrier sense.
  7. ^ a b c d
  8. ^
  9. ^ a b
  10. ^ a b c d
  11. ^

Bibliography

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.