In chemistry, an ideal solution or ideal mixture is a solution with thermodynamic properties analogous to those of a mixture of ideal gases. The enthalpy of solution (or "enthalpy of mixing") is zero^{[1]} as is the volume change on mixing; the closer to zero the enthalpy of solution is, the more "ideal" the behavior of the solution becomes. The vapor pressure of the solution obeys Raoult's law, and the activity coefficient of each component (which measures deviation from ideality) is equal to one.^{[2]}
The concept of an ideal solution is fundamental to chemical thermodynamics and its applications, such as the use of colligative properties.
Contents

Physical origin 1

Formal definition 2

Thermodynamic properties 3

Volume 3.1

Enthalpy and heat capacity 3.2

Entropy of mixing 3.3

Consequences 4

Nonideality 5

See also 6

References 7
Physical origin
Ideality of solutions is analogous to ideality for gases, with the important difference that intermolecular interactions in liquids are strong and cannot simply be neglected as they can for ideal gases. Instead we assume that the mean strength of the interactions are the same between all the molecules of the solution.
More formally, for a mix of molecules of A and B, the interactions between unlike neighbors (U_{AB}) and like neighbors U_{AA} and U_{BB} must be of the same average strength, i.e., 2 U_{AB} = U_{AA} + U_{BB} and the longerrange interactions must be nil (or at least indistinguishable). If the molecular forces are the same between AA, AB and BB, i.e., U_{AB} = U_{AA} = U_{BB}, then the solution is automatically ideal.
If the molecules are almost identical chemically, e.g., 1butanol and 2butanol, then the solution will be almost ideal. Since the interaction energies between A and B are almost equal, it follows that there is a very small overall energy (enthalpy) change when the substances are mixed. The more dissimilar the nature of A and B, the more strongly the solution is expected to deviate from ideality.
Formal definition
Different related definitions of an ideal solution have been proposed. The simplest definition is that an ideal solution is a solution for which each component (i) obeys Raoult's law p_i=x_ip_i^* for all compositions. Here p_i is the vapor pressure of component i above the solution, x_i is its mole fraction and p_i^* is the vapor pressure of the pure substance i at the same temperature.^{[3]}^{[4]}^{[5]}
This definition depends on vapor pressures which are a directly measurable property, at least for volatile components. The thermodynamic properties may then be obtained from the chemical potential μ (or partial molar Gibbs energy g) of each component, which is assumed to be given by the ideal gas formula

\mu(T,p_i) = g(T,p_i)=g^\mathrm{u}(T,p^u)+RT\ln {\frac{p_i}{p^u}}.
The reference pressure p^u may be taken as P^0 = 1 bar, or as the pressure of the mix to ease operations.
On substituting the value of p_i from Raoult's law,

\mu(T,p_i) =g^\mathrm{u}(T,p^u)+RT\ln {\frac{p_i^*}{p^u}} + RT\ln x_i =\mu _i^*+ RT\ln x_i.
This equation for the chemical potential can be used as an alternate definition for an ideal solution.
However, the vapor above the solution may not actually behave as a mixture of ideal gases. Some authors therefore define an ideal solution as one for which each component obeys the fugacity analogue of Raoult's law f_i=x_if_i^*,
Here f_i is the fugacity of component i in solution and f_i^* is the fugacity of i as a pure substance.^{[6]}^{[7]} Since the fugacity is defined by the equation

\mu(T,P) = g(T,P)=g^\mathrm{u}(T,p^u)+RT\ln {\frac{f_i}{p^u}}
this definition leads to ideal values of the chemical potential and other thermodynamic properties even when the component vapors above the solution are not ideal gases. An equivalent statement uses thermodynamic activity instead of fugacity.^{[8]}
Thermodynamic properties
Volume
If we differentiate this last equation with respect to P at T constant we get:

\left(\frac{\partial g(T,P)}{\partial P}\right)_{T}=RT\left(\frac{\partial \ln f}{\partial P}\right)_{T}
but we know from the Gibbs potential equation that:

\left(\frac{\partial g(T,P)}{\partial P}\right)_{T}=v
These last two equations put together give:

\left(\frac{\partial \ln f}{\partial P}\right)_{T}=\frac{v}{RT}
Since all this, done as a pure substance is valid in a mix just adding the subscript i to all the intensive variables and changing v to \bar{v_i}, standing for Partial molar volume.

\left(\frac{\partial \ln f_i}{\partial P}\right)_{T,x_i}=\frac{\bar{v_i}}{RT}
Applying the first equation of this section to this last equation we get

v_i^*=\bar{v_i}
which means that in an ideal mix the volume is the addition of the volumes of its components.
Enthalpy and heat capacity
Proceeding in a similar way but derivative with respect of T we get to a similar result with enthalpies

\frac{g(T,P)g^\mathrm{gas}(T,p^u)}{RT}=\ln\frac{f}{p^u}
derivative with respect to T and remembering that \left( \frac{\partial \frac{g}{T}}{\partial T}\right)_P=\frac{h}{T^2} we get:

\frac{\bar{h_i}h_i^\mathrm{gas}}{R}=\frac{h_i^*h_i^\mathrm{gas}}{R}
which in turn is \bar{h_i}=h_i^*.
Meaning that the enthalpy of the mix is equal to the sum of its components.
Since \bar{u_i}=\bar{h_i}p\bar{v_i} and u_i^*=h_i^*pv_i^*:

u_i^*=\bar{u_i}
It is also easily verifiable that

C_{pi}^*=\bar{C_{pi}}
Entropy of mixing
Finally since

\bar{g_i}=\mu _i=g_i^\mathrm{gas}+RT\ln \frac{f_i}{p^u}=g_i^\mathrm{gas}+RT\ln \frac{f_i^*}{p^u}+RT\ln x_i=\mu _i^*+ RT\ln x_i
Which means that

\Delta g_{i,\mathrm{mix}}=RT\ln x_i
and since
G=\sum_i x_i{g_i}
then

\Delta G_\mathrm{mix}=RT\sum_i{x_i\ln x_i}
At last we can calculate the entropy of mixing since g_i^*=h_i^*Ts_i^* and \bar{g_i}=\bar{h_i}T\bar{s_i}

\Delta s_{i,\mathrm{mix}}=R\sum _i \ln x_i

\Delta S_\mathrm{mix}=R\sum _i x_i\ln x_i
Consequences
SolventSolute interactions are similar to solutesolute and solventsolvent interactions
Since the enthalpy of mixing (solution) is zero, the change in Gibbs free energy on mixing is determined solely by the entropy of mixing. Hence the molar Gibbs free energy of mixing is

\Delta G_{\mathrm{m,mix}} = RT \sum_i x_i \ln x_i
or for a two component solution

\Delta G_{\mathrm{m,mix}} = RT (x_A \ln x_A + x_B \ln x_B)
where m denotes molar, i.e., change in Gibbs free energy per mole of solution, and x_i is the mole fraction of component i.
Note that this free energy of mixing is always negative (since each x_i is positive and each \ln x_i must be negative), i.e., ideal solutions are always completely miscible.
The equation above can be expressed in terms of chemical potentials of the individual components

\Delta G_{\mathrm{m,mix}} = \sum_i x_i \Delta\mu_{i,\mathrm{mix}}
where \Delta\mu_{i,\mathrm{mix}}=RT\ln x_i is the change in chemical potential of i on mixing.
If the chemical potential of pure liquid i is denoted \mu_i^*, then the chemical potential of i in an ideal solution is

\mu_i = \mu_i^* + \Delta \mu_{i,\mathrm{mix}} = \mu_i^* + RT \ln x_i
Any component i of an ideal solution obeys Raoult's Law over the entire composition range:

\ P_{i}=(P_{i})_{pure} x_i
where

(P_i)_{pure}\, is the equilibrium vapor pressure of the pure component

x_i\, is the mole fraction of the component in solution
It can also be shown that volumes are strictly additive for ideal solutions.
Nonideality
Deviations from ideality can be described by the use of Margules functions or activity coefficients. A single Margules parameter may be sufficient to describe the properties of the solution if the deviations from ideality are modest; such solutions are termed regular.
In contrast to ideal solutions, where volumes are strictly additive and mixing is always complete, the volume of a nonideal solution is not, in general, the simple sum of the volumes of the component pure liquids and solubility is not guaranteed over the whole composition range. By measurement of densities thermodynamic activity of components can be determined.
See also
References

^ A to Z of Thermodynamics Pierre Perrot ISBN 0198565569

^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "ideal mixture".

^ P. Atkins and J. de Paula, Atkins’ Physical Chemistry (8th edn, W.H.Freeman 2006), p.144

^ T. Engel and P. Reid Physical Chemistry (Pearson 2006), p.194

^ K.J. Laidler and J.H. Meiser Physical Chemistry (BenjaminCummings 1982), p.180

^ R.S. Berry, S.A. Rice and J. Ross, Physical Chemistry (Wiley 1980) p.750

^ I.M. Klotz, Chemical Thermodynamics (Benjamin 1964) p.322

^ P.A. Rock, Chemical Thermodynamics: Principles and Applications (Macmillan 1969), p.261
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.