World Library  
Flag as Inappropriate
Email this Article

Idle air control actuator

Article Id: WHEBN0034147907
Reproduction Date:

Title: Idle air control actuator  
Author: World Heritage Encyclopedia
Language: English
Subject: Turbo fuel stratified injection, Hydrolock, Bore (engine), Glasspack, Timing mark
Collection: Engine Sensors, Engine Technology
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Idle air control actuator

An idle air control actuator or idle air control valve (IAC actuator/valve) is a device commonly used in fuel-injected vehicles to control the engine's idling RPM. In carburetted vehicles a similar device known as an idle speed control actuator is used.

Description

The IAC, actuator is an electrically controlled valve, which gets its input from the vehicle's ECU. The valve is fitted such that it bypasses the actual throttle valve. The actuator consists of a solenoid that controls a plunger/valve which variably restricts air flow through the device's body. Electric current through the solenoid determines how much (or less) the plunger constricts air-flow which means that the amount by which the valve opens can be controlled by an electric current. Thus, the ECU can control the amount of air that bypasses the throttle when the throttle is fully closed, thereby controlling the engine's idle RPM.

Without the IAC, the only way to control idling is by adjusting the throttle valve itself - this may be inefficient in terms of mileage and/or emissions. Electronically controlling the air enables just the right amount of air needed to maintain the designated idle RPM irrespective of the ambient and/or engine conditions. This also allows the ECU to dynamically respond to changes in engine load where the driver does not press the accelerator whilst putting the vehicle in gear (i.e., anti-stall feature). Thus the driver can more easily move the car from stand-still by merely releasing the clutch (manual transmission) or the brake (automatic transmission) without having to simultaneously press the accelerator

Problems with IAC

Although the IAC is supposed to last the vehicle's lifetime, various reasons may cause it to fail/malfunction prematurely. The most common failure mode is partial/complete jamming of the valve (due to dirt/dust or even oil) where it cannot be smoothly controlled. The result is an engine that idles very rough and frequently stalls. A valve that is only jammed may be restored simply by cleaning it. However a

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.