World Library  
Flag as Inappropriate
Email this Article

Oregon City Bridge

Article Id: WHEBN0000979895
Reproduction Date:

Title: Oregon City Bridge  
Author: World Heritage Encyclopedia
Language: English
Subject: List of crossings of the Willamette River, West Linn, Oregon, Bridges of Portland, Oregon, Oregon City Municipal Elevator, Canby Ferry
Collection: 1922 Establishments in Oregon, Bridges by Conde McCullough, Bridges Completed in 1922, Bridges in Clackamas County, Oregon, Bridges on the National Register of Historic Places in Oregon, Bridges Over the Willamette River, Buildings and Structures in Oregon City, Oregon, Historic American Engineering Record in Oregon, National Register of Historic Places in Clackamas County, Oregon, Road Bridges in Oregon, Through Arch Bridges, U.S. Route 99, West Linn, Oregon
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Oregon City Bridge

Oregon City Bridge
Carries OR 43
Crosses Willamette River
Locale Oregon City to
West Linn, Oregon, USA
Maintained by Oregon DOT
Characteristics
Design through arch of hollow
box girder construction
Total length 745 ft (227 m)
Longest span 360 ft (110 m)
History
Opened

December 28, 1922

Willamette River Bridge (No. 357)
Oregon City Bridge is located in Oregon
Location Oregon City, Oregon; Willamette River at river mile 26.0
Coordinates
Built 1922
Architect Conde B. McCullough
Governing body State of Oregon
NRHP Reference # 05000639[1]
Added to NRHP July 1, 2005[1]

The Oregon City Bridge is a steel through arch bridge spanning the Willamette River between Oregon City and West Linn, Oregon, United States. Completed in 1922, it is listed on the National Register of Historic Places. It was built and is owned by the Oregon Department of Transportation (ODOT) as part of Oregon Route 43 and is the third southernmost Willamette bridge in the Portland metropolitan area, after the Boone Bridge in Wilsonville and the Oregon 219 bridge near Newberg.

The bridge is 745 ft (227 m) in length and 28 ft (8½ m) wide with a 360 ft (110 m) long main span that provides 49 ft (15 m) of vertical clearance at low river levels. The narrow width causes problems for large vehicles that cross it, often requiring traffic going in the other direction to stop. TriMet buses ceased using the bridge in 2009.

This bridge is the only Oregon bridge to be encased in gunite, which protects it from corrosive sulfur dioxide emissions from paper mills south of the bridge. The concrete look was favored by bridge designer Conde McCullough, designer of 500 Oregon bridges. His signature detailing is evident in the obelisk pylons with sconced light fixtures, ornate railings, and Art Deco piers.[2]

The Oregon City Bridge is just downstream from the 40 ft (12 m) tall Interstate 205.

Contents

  • History 1
  • Current use 2
  • Gallery 3
  • See also 4
  • References 5
  • External links 6

History

Construction workers using the old suspension bridge to support the arch of the new bridge while under construction. Caption from Popular Science magazine, November 1922

The bridge was built to replace an 1888 pedestrian suspension bridge; workers used the old bridge to begin construction of the present bridge's box steel ribs.[3] Construction was made difficult by the great depth of the river at the bridge site and by the water traffic during construction. Construction workers used the cables of the old bridge to support the arch prior to completion by running cables from the arch, over the cables to an anchor on the far side. Once the new arch was completed, the old suspension bridge was dismantled.[4] The present bridge was opened for public use on December 28, 1922; the cost of construction was published as $300,000.[5]

The piers were designed to accommodate public restrooms. The deck widens at the piers to provide room for the stairways – one on each side of the deck – that once descended to the restrooms. Repeated vandalism led to the closure of the restrooms in 1937, and the stairway entrances were covered over with concrete. Windows for "observation balconies" that were originally included in the piers, at the tops on both sides, were also sealed in concrete after closure.[6]

The bridge was added to the National Register of Historic Places (as the Willamette River (Oregon City) Bridge (No. 357)) on July 1, 2005.[1][7]

In March 2009, ODOT imposed new weight limits for vehicles crossing the bridge, after inspections revealed damage to some of the structure's floor beams. Large commercial vehicles, or any vehicle weighing more than 14 tons, were banned from using the bridge.[8] Among other impacts, the restriction meant the rerouting of all TriMet buses. The two routes using the bridge at that time, 35-Macadam and 154-Willamette, were rerouted across the Abernethy Bridge (I-205 bridge).[8][9]

In 2010–2012, the Oregon City Bridge was given an extensive rehabilitation, overseen by ODOT. Work began in July 2010,[10] and the bridge was temporarily closed to all traffic starting in January 2011.[11][12] The bridge reopened on October 15, 2012,[13] with the $15 million restoration project nearly completed. The final items of work were completed in early 2013.[10] According to ODOT, one of the "intentions" of the project was to "restore [the bridge's] original load-carrying capacity",[14] which would permit TriMet buses to resume using the bridge. However, as of September 2013 TriMet service had not returned to the bridge, and it is unknown whether the transit agency is planning to restore the former routings, or whether ODOT actually has restored the old (higher) load limits.

Current use

As of 2000, the bridge carried 12,800 vehicles per day, which represents only a 40% growth in traffic since 1953, when a public debate was held about building a parallel bridge next to the existing bridge. While the Oregon City Bridge did not get twinned, the George Abernethy Bridge (I-205 Bridge) opened in 1970 and has since become the major route through the area. TriMet buses crossed the bridge until March 2009, when a new weight limit temporarily banned buses and heavy commercial vehicles from using the bridge.[9]

Gallery

See also

References

  1. ^ a b c "National Register of Historic Places: Weekly list of actions taken on properties: 7/25/05 through 7/29/05".  
  2. ^ Smith, Dwight A.;  
  3. ^ Hadlow, Robert W. (2001). Elegant Arches, Soaring Spans: C.B. McCullough, Oregon's Master Bridge Builder.  
  4. ^ "Old Bridge, Doomed, Helps to Build Successor". Popular Science Monthly. November 1922. p. 39. 
  5. ^ Wood, Sharon (2001). The Portland Bridge Book. Oregon Historical Society.  
  6. ^ James A. McNett (June 4, 2004). "National Register of Historic Places Registration Form: Willamette River (OregonCity) Bridge (No. 357)" (PDF). National Park Service. Retrieved September 30, 2013. 
  7. ^ "Oregon National Register List" (PDF). Oregon Parks and Recreation Department. June 6, 2011. p. 4. Retrieved April 24, 2013. 
  8. ^ a b "Traffic Advisory: New Restrictions on Oregon City Arch Bridge" (PDF).  
  9. ^ a b Roberts, Anthony (March 3, 2009). "Damaged beams force weight limits on historic OC bridge".  
  10. ^ a b "OR 43: Oregon City–West Linn Arch Bridge Rehabilitation Project".  
  11. ^ Mayes, Steve (January 7, 2011). "Historic Oregon City-West Linn bridge closes Jan. 15 for 2-year upgrade".  
  12. ^ "OR 43: Oregon City–West Linn Arch Bridge Rehabilitation Project".  
  13. ^ Hottman, Sara (October 14, 2012). "Long-awaited Arch Bridge re-opening marked with three-day festival, vow renewal".  
  14. ^ "Media Advisory: Ceremonial re-opening Sunday of the Arch Bridge" (PDF). ODOT. p. 2. Retrieved June 6, 2013. 
  • Historic American Buildings Survey/Historic American Engineering Record. Willamette River Bridges Recording Project (HAER OR-31). National Park Service and ODOT, 1992

External links

  • Oregon City Bridge (with a link to an Microsoft Word document about the bridge), from the website of the state of Oregon
  • Built in America list with link to bridge information, from the Library of Congress website
  • Photo of 1888 suspension bridge, from a bridge fan's website
  • Historic American Engineering Record (HAER) No. OR-31, "Willamette River Bridge, Spanning Willamette River on Oswego Highway 3, Oregon City, Clackamas County, OR", 20 photos, 2 color transparencies, 30 measured drawings, 10 data pages, 4 photo caption pages
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.