World Library  
Flag as Inappropriate
Email this Article

Road surface

Article Id: WHEBN0000241387
Reproduction Date:

Title: Road surface  
Author: World Heritage Encyclopedia
Language: English
Subject: Road, Bleeding (roads), Crocodile cracking, Sett (paving), Sealed road
Collection: Articles Containing Video Clips, Pavements, Road Hazards, Road Infrastructure
Publisher: World Heritage Encyclopedia

Road surface

A road in the process of being resurfaced
Asphalt Mixing Plant is Working in Algeria, May 2013.[1]

Road surface or pavement (American English) is the durable surface material laid down on an area intended to sustain vehicular or foot traffic, such as a road or walkway. In the past, gravel road surfaces, cobblestone and granite setts were extensively used, but these surfaces have mostly been replaced by asphalt or concrete laid on a compacted base course. Road surfaces are frequently marked to guide traffic. Today, permeable paving methods are beginning to be used for low-impact roadways and walkways.


  • Asphalt 1
  • Concrete 2
  • Composite surfaces 3
  • Recycling 4
    • In-place recycling 4.1
  • Bituminous surface 5
    • Thin membrane surface 5.1
    • Otta seal 5.2
  • Gravel surface 6
  • Other surfaces 7
  • Acoustical implications 8
  • Surface deterioration 9
  • Markings 10
  • See also 11
  • Notes 12
  • External links 13


Closeup of asphalt on a driveway

Asphalt (specifically, asphalt concrete) has been widely used since the 1920s. The viscous nature of the bitumen binder allows asphalt concrete to sustain significant plastic deformation, although fatigue from repeated loading over time is the most common failure mechanism. Most asphalt surfaces are laid on a gravel base, which is generally at least as thick as the asphalt layer, although some 'full depth' asphalt surfaces are laid directly on the native subgrade. In areas with very soft or expansive subgrades such as clay or peat, thick gravel bases or stabilization of the subgrade with Portland cement or lime may be required. Polypropylene and polyester geosynthetics have also been used for this purpose[2] and in some northern countries, a layer of polystyrene boards have been used to delay and minimize frost penetration into the subgrade.[3]

Depending on the temperature at which it is applied, asphalt is categorized as hot mix, warm mix, or cold mix. Hot mix asphalt is applied at temperatures over 300°F (150°C) with a

  • PaveShare - Concrete Paver Education
  • "Pavements" website of the US Department of Transportation's Federal Highway Administration

External links

  1. ^ "LB1500 Asphalt Plant Installed Successfully at Algeria". 
  2. ^ "NUAE Geosynthetics Ltd. News: Project Scout Moor Wind farm". NUAE. May 2007. Retrieved 2 November 2008. 
  3. ^ Anon (June 1991). "Highway construction/ Ground insulation". Styropor: Technical information. Retrieved 29 January 2010. 
  4. ^ "Warm Mix Asphalt Technologies and Research". Federal Highway Administration. 29 October 2008. Retrieved 4 August 2010. 
  5. ^ "Hot, Warm, Luke Warm and Cold Mix Asphalt". Cornell Local Roads Program. June 2009. Retrieved 4 August 2010. 
  6. ^ a b c Gerbrandt, Ron; Tim Makahoniuk; Cathy Lynn Borbely; Curtis Berthelot (2000). "Guidelines must be followed strictly – No exceptions". Effect of Cold-in-place recycling on the Heavyweight Trucking Industry. 6th International Conference on Heavy Vehicle Weights and Dimension Proceedings. Retrieved 25 January 2009. 
  7. ^ "Concrete Pavement Restoration". Retrieved 7 April 2012. 
  8. ^ "Concrete Pavement Rehabilitation Guide for Diamond Grinding". Retrieved 7 April 2012. 
  9. ^ Lee, B. J. and Lee, H. (2004), Position-Invariant Neural Network for Digital Pavement Crack Analysis. Computer-Aided Civil and Infrastructure Engineering, 19: 105–118. doi:10.1111/j.1467-8667.2004.00341.x
  10. ^ Kulsea, Bill; Shawver, Tom; Kach, Carol (1980). Making Michigan Move: A History of Michigan Highways and the Michigan Department of Transportation. Lansing, Michigan: Michigan Department of Transportation.  
  11. ^ Rubblizing with Bituminous Concrete Overlay – 10 Years' Experience in Illinois, Illinois Department of Transportation, April 2002,
  12. ^ a b c Cornell Local Roads Program, Asphalt Paving Principles, March 2004
  13. ^ Sprayed Seal, Local Government & Municipal Knowledge Base, accessed 29 January 2010
  14. ^ Gransberg, Douglas D.; James, David M. B. (2005). Chip Seal Best Practices (Digitised online by Google books). National Cooperative Highway. Transportation Research Board. pp. 13–20.  
  15. ^ Lazic, Zvjezdan; Ron Gerbrandt (2004). "Feasibility of Alternative salt storage structures in Saskatchewan Neilburg case study" (pdf). Measuring performance indicators for decision-making in winter mainenance operations. 2004 Annual conference of the Transportation Association of Canada. Saskatchewan Highways and Transportation. Retrieved 25 February 2009. 
  16. ^ a b "Highways and Infrastructure — Government of Saskatchewan". Archived from the original on 8 February 2008. Retrieved 15 April 2008. 
  17. ^ Manins, Rosie (28 February 2009). "New dust suppression method".  
  18. ^ Anon (July 1998). "Bronze Age metalled road near Oxford". British Archaeology: News (Council for British Archaeology) (36). Retrieved 29 January 2010. 
  19. ^ Anon. "Road metal". Merriam-Webster online dictionary. Merriam Webster inc. Retrieved 29 January 2010. 
  20. ^ Anon. "Metal". Online etymological dictionary. 2001 Douglas Harper. Retrieved 29 January 2010. 
  21. ^ Anon. "Metalled Road". World Web Online. WordWeb Software. Retrieved 29 January 2010. 
  22. ^ "Surfacing Aggregate". Product brochure. South Africa. 2008. Retrieved 25 January 2009. 
  23. ^ Oeser, Markus; Sabine Werkmeister; Alvaro Gonzales; David Alabaster (2008). "Experimental and numerical simulation of loading impact on modified granular pavements". 8th World Congress on Computational Mechanics 5th European Congress on computational methods in applied sciences and engineering ECCOMAS. 6th International Conference on Heavy Vehicle Weights and Dimension Proceedings. Retrieved 25 January 2009. 
  24. ^ Mary C. Rukashaza-Mukome, et al. (2003). "Cost Comparison of Treatments Used to Maintain or Upgrade Aggregate Roads". Proceedings of the 2003 Mid-Continent Transportation Research Symposium. Iowa State University. Retrieved 16 September 2011. 
  25. ^ "Roads to Ruin: Towns Rip Up the Pavement". Wall Street Journal. 17 July 2010. Retrieved 16 September 2011. 
  26. ^ "De balans opgemaakt: Duurzaam Veilig 1998-2007" [Sustainable Safety in the Netherlands - 1998-2007] (in Dutch). SWOV, Dutch Institute for Road Safety Research. 2009. p. 6 (English abstract).  
  27. ^ Hembrow, David (25 April 2011). "Road noise, cobbles and smooth asphalt". A view from the cycle path. Retrieved 14 August 2014. 
  28. ^ Fred Young (23 February 2013). What can Seattle learn from Dutch street design? (presentation video). Seattle Neighborhood Greenways. Event occurs at 3:49 and 9:19 min. Retrieved 14 August 2014. ... the cycle track is asphalt (...) and the lane for cars is brick ... 
  29. ^ "Endurablend Systems for Color Surfacing - Colors, Seals, Textures and Protects to Extend Service Life of Asphalt and Concrete Pavement Surfaces". Retrieved 13 November 2014. 
  30. ^ High-Performance Crosswalks. Alternative Paving Concepts. Retrieved 13 November 2014. 
  31. ^ "ColorPave: Asphalt Color, Green Parking, Color Coating, Asphalt Paint". SealMaster. Retrieved 13 November 2014. 
  32. ^ "Decorative Stamped Asphalt". ThermOTrack. Retrieved 13 November 2014. 
  33. ^ C.M. Hogan, , Volume 2, Number 3, Biomedical and Life Sciences and Earth and Environmental Science Issue, Pages 387–392, September, 1973, Springer Verlag, Netherlands ISSN 0049-6979Journal of Water, Air, & Soil Pollution"Analysis of highway noise",
  34. ^
  35. ^
  36. ^ Statement Of Garth Dull For The Senate Epw Committee
  37. ^ "Scientists walk on tech pavement". BBC News. 12 September 2006. Retrieved 22 May 2010. 
  38. ^ "The Value of Smooth". Better Roads. Randall Reilly. August 2011. 


See also

Road surface markings are used on paved roadways to provide guidance and information to drivers and pedestrians. It can be in the form of mechanical markers such as cat's eyes, botts' dots and rumble strips, or non-mechanical markers such as paints, thermoplastic, plastic and epoxy.


In addition to repair costs, the condition of a road surface has economic effects for road users. Rolling resistance increases on rough pavement, as does wear and tear of vehicle components. It has been estimated that poor road surfaces cost the average US driver $324 per year in vehicle repairs, or a total of $67 billion. Also, it has been estimated that small improvements in road surface conditions can decrease fuel consumption between 1.8 and 4.7%.[38]

Further research by University College London into pavements has led to the development of an indoor, 80-sq-metre artificial pavement at a research centre called Pedestrian Accessibility and Movement Environment Laboratory (PAMELA). It is used to simulate everyday scenarios, from different pavement users to varying pavement conditions.[37] There also exists a research facility near Auburn University, the NCAT Pavement Test Track, that is used to test experimental asphalt pavements for durability.

The physical properties of a stretch of pavement can be tested using a falling weight deflectometer.

Several design methods have been developed to determine the thickness and composition of road surfaces required to carry predicted traffic loads for a given period of time. Pavement design methods are continuously evolving. Among these are the Shell Pavement design method, and the American Association of State Highway and Transportation Officials (AASHTO) 1993 "Guide for Design of Pavement Structures". A new mechanistic-empirical design guide has been under development by NCHRP (Called Superpave Technology) since 1998. A new design guide called Mechanistic Empirical Pavement Design Guide (MEPDG) was developed and is about to be adopted by AASHTO.

Other failure modes include aging and surface abrasion. As years go by, the binder in a bituminous wearing course gets stiffer and less flexible. When it gets "old" enough, the surface will start losing aggregates, and macrotexture depth increases dramatically. If no maintenance action is done quickly on the wearing course, potholes will form. If the road is still structurally sound, a bituminous surface treatment, such as a chipseal or surface dressing can prolong the life of the road at low cost. In areas with cold climate, studded tires may be allowed on passenger cars. In Sweden and Finland, studded passenger car tires account for a very large share of pavement rutting.

As pavement systems primarily fail due to fatigue (in a manner similar to metals), the damage done to pavement increases with the fourth power of the axle load of the vehicles traveling on it. According to the AASHO Road Test, heavily loaded trucks can do more than 10,000 times the damage done by a normal passenger car. Tax rates for trucks are higher than those for cars in most countries for this reason, though they are not levied in proportion to the damage done.[36] Passenger cars are considered to have no practical effect on a pavement's service life, from a fatigue perspective.

Deteriorating asphalt

Surface deterioration

Tactile Paving is commonly used in commercial paving to create a more non-slip style of paving.[35]

Natural Granite can also be used to create smooth paving that can be cut into various shapes.[34]

Roadway surfacing choices are known to affect the intensity and spectrum of sound emanating from the tire/surface interaction.[33] Initial applications of this knowledge occurred in the early 1970s. Roadway surface types contribute differential noise effects of up to four dB, with chip seal type and grooved roads being the loudest and concrete surfaces without spacers being the quietest. Asphaltic surfaces perform intermediately relative to concrete and chip seal. These phenomena are, of course, highly influenced by vehicle speed. Rubberized asphalt has been shown to give a marginal 3-5 dB reduction in tire-pavement noise emissions, and a marginally-discernible 1-3 decibel reduction in total road noise emissions when compared to conventional asphalt applications.

Acoustical implications

There are also other methods and materials to create pavements that have appearance of brick pavements. The first method to create brick texture is to heat an asphalt pavement and use metal wires to imprint a brick pattern using a compactor to create stamped asphalt. A similar method is to use rubber imprinting tools to press over a thin layer of cement to create decorative concrete. Another method is to use a brick pattern stencil and apply a surfacing material over the stencil. Materials that can be applied to give the color of the brick and skid resistance can be in many forms. An example is to use colored polymer-modified concrete slurry which can be applied by screeding or spraying.[29] Another material is aggregate-reinforced thermoplastic which can be heat applied to the top layer of the brick-pattern surface.[30] Other coating materials over stamped asphalt are paints and two-part epoxy coating.[31][32]

Likewise, macadam and tarmac pavements can still sometimes be found buried underneath asphalt concrete or Portland cement concrete pavements, but are rarely constructed today.

Brick, cobblestone, sett, and wood plank pavements, such as Nicolson pavement, were once common in urban areas throughout the world, but fell out of fashion in most countries, due to the high cost of labor required to lay and maintain them, and are typically only kept for historical or aesthetic reasons. In some countries, however, they are still common in local streets. In the Netherlands, brick paving has made somewhat of a comeback since the adoption of a major nationwide traffic safety program in 1997. From 1998 through 2007, more than 41,000 km of city streets were converted to local access roads with a speed limit of 30 km/h, for the purpose of traffic calming.[26] One popular measure is to use brick paving - the noise and vibration slows motorists down. At the same time, it is not uncommon for cycle paths alongside a road to have a smoother surface than the road itself.[27][28]

Pavers (or paviours), generally in the form of pre-cast concrete blocks, are often used for aesthetic purposes, or sometimes at port facilities that see long-duration pavement loading. Pavers are rarely used in areas that see high-speed vehicle traffic.

Other surfaces

Some communities are finding it makes sense to convert their low volume paved roads to aggregate surfaces.[25]

The decision whether to pave a gravel road or not often hinges on traffic volume. It has been found that maintenance costs for gravel roads often exceed the maintenance costs for paved or surface treated roads when traffic volumes exceed 200 vehicles per day.[24]

A granular surface can be used with a traffic volume where the annual average daily traffic is 1,200 vehicles per day or less. There is some structural strength as the road surface combines a sub base and base and is topped with a double graded seal aggregate with emulsion.[6][22] Besides the 4,929 kilometres (3,063 mi) of granular pavements maintained in Saskatchewan, around 40% of New Zealand roads are unbound granular pavement structures.[16][23]

Gravel is known to have been used extensively in the construction of roads by soldiers of the Roman Empire (see Roman road) but a limestone-surfaced road, thought to date back to the Bronze Age, has been found in Britain.[18] Applying gravel, or "metalling," has had two distinct usages in road surfacing. The term road metal refers to the broken stone or cinders used in the construction or repair of roads or railways,[19] and is derived from the Latin metallum, which means both "mine" and "quarry".[20] The term originally referred to the process of creating a gravel roadway. The route of the roadway would first be dug down several feet and, depending on local conditions, French drains may or may not have been added. Next, large stones were placed and compacted, followed by successive layers of smaller stones, until the road surface was composed of small stones compacted into a hard, durable surface. "Road metal" later became the name of stone chippings mixed with tar to form the road surfacing material tarmac. A road of such material is called a "metalled road" in Britain, a "paved road" in Canada and the USA, or a "sealed road" in Australia and New Zealand.[21]

Gravel surface

Otta seal is a low-cost road surface using a 16–30-millimetre (0.63–1.18 in) thick mixture of bitumen and crushed rock.[17]

Otta seal

A thin membrane surface (TMS) is an oil treated aggregate which is laid down upon a gravel road bed producing a dust free road.[15] A TMS road reduces mud problems and provides stone free roads for local residents where loaded truck traffic is negligible. The TMS layer adds no significant structural strength, and so is used on secondary highways with low traffic volume and minimal weight loading. Construction involves minimal subgrade preparation, following by covering with a 50 to 100 millimetres (2.0–3.9 in) cold mix asphalt aggregate.[6] The Operation Division of the Ministry of Highways and Infrastructure in Saskatchewan has the responsibility of maintaining 6,102 kilometres (3,792 mi) of thin membrane surface (TMS) highways.[16]

Thin membrane surface

Other types of BSTs include micropaving, slurry seals and Novachip. These are laid down using specialized and proprietary equipment. They are most often used in urban areas where the roughness and loose stone associated with chip seals is considered undesirable.

BST is used on hundreds of miles of the Alaska Highway and other similar roadways in Alaska, the Yukon Territory, and northern British Columbia. The ease of application of BST is one reason for its popularity, but another is its flexibility, which is important when roadways are laid down over unstable terrain that thaws and softens in the spring.

Bituminous surface treatment (BST) or chipseal is used mainly on low-traffic roads, but also as a sealing coat to rejuvenate an asphalt concrete pavement. It generally consists of aggregate spread over a sprayed-on asphalt emulsion or cut-back asphalt cement. The aggregate is then embedded into the asphalt by rolling it, typically with a rubber-tired roller. This type of surface is described by a wide variety of regional terms including "chip seal", "tar and chip", "oil and stone", "seal coat", "sprayed seal"[13] or "surface dressing".[14]

Bituminous surface

  • Rubblizing of concrete pavement. Existing concrete pavement is broken into gravel-sized particles. Any steel reinforcing is removed, then the remaining gravel-sized particles are compacted and overlaid with asphalt pavement.[11]
  • Cold in-place recycling. Bituminous pavement is ground or milled into small particles. The asphalt millings are blended with a small amount of asphalt emulsion or foamed bitumen, paved and compacted, allowed to cure for seven to ten days, then overlaid with asphalt.[12]
  • Hot in-place recycling. Bituminous pavement is heated to 250 to 300°F (120 to 150°C), milled, combined with a rejuvenating agent or virgin asphalt binder, and compacted. It may then be overlaid with a new asphalt overlay. This process only recycles the top two inches (50 mm) or less, so it can be used to correct rutting, polishing or other surface defects. It is not a good procedure for roads with structural failures. It also generates high heat and vapor emissions, and may not be a good candidate for built-up areas.[12]
  • Full depth reclamation is a process which pulverizes the full thickness of the asphalt pavement and some of the underlying material to provide a uniform blend of material. A binding agent may be mixed in to form a base course for the new pavement, or it may be left unbound to form a subbase course. Common binding agents include asphalt emulsion, fly ash, Portland cement or calcium chloride. It can also be mixed with aggregate, recycled asphalt millings, or crushed Portland cement to improve the gradation of the material, and can provide a design life cycle of 30 years with proper lab testing and field verification.[12]

In-place recycling

Distressed road materials can be reused when rehabilitating a roadway. The existing pavement is ground or broken up into small pieces, through a process called milling. It can then be transported to an asphalt or concrete plant and incorporated into new pavement, or recycled in place to form the base or subbase for new pavement. Some methods used include:

An asphalt milling machine in Boise, Idaho.


Whitetopping uses Portland cement concrete to resurface a distressed asphalt road.

To decrease reflective cracking, concrete pavement is sometimes "cracked and seated." A heavy weight is dropped on the concrete to induce cracking, then a heavy roller is used to seat the resultant pieces into the subbase. The theory is frequent small cracks will spread thermal stress over a wider area than infrequent large joints, reducing the stress on the overlying asphalt pavement.

Asphalt overlays are sometimes laid over distressed concrete to restore a smooth wearing surface. A disadvantage of this method is that movement in the joints between the underlying concrete slabs, whether from thermal expansion and contraction, or from deflection of the concrete slabs from truck axle loads, usually cause cracks, called reflective cracks in the asphalt.

Composite surfaces combine Portland cement concrete and asphalt. They are usually used to rehabilitate existing roadways rather than in new construction.

An example of composite pavement: hot mix asphalt overlaid onto Portland cement concrete pavement

Composite surfaces

The first street in the United States to be paved with concrete was Court Avenue in Bellefontaine, Ohio in 1891.[9] The first mile of concrete pavement in the United States was on Woodward Avenue in Detroit, Michigan in 1909.[10]

One of the major advantages of concrete pavements is they are typically stronger and more durable than asphalt roadways. They also can be grooved to provide a durable skid-resistant surface. A notable disadvantage is that they typically can have a higher initial cost, and can be more time-consuming to construct. This cost can typically be offset through the long life cycle of the pavement. Concrete pavement can be maintained over time utilizing a series of methods known as concrete pavement restoration which include diamond grinding, dowel-bar retrofits, joint and crack sealing, cross-stitching, etc. Diamond grinding is also useful in reducing noise and restoring skid resistance in older concrete pavement.[7][8]

Continuously reinforced designs may cost slightly more than jointed reinforced or jointed plain designs due to increased quantities of steel. Often the cost of the steel is offset by the reduced cost of concrete because a continuously reinforced design is nearly always significantly thinner than a jointed design for the same traffic loads. Properly designed, the two methods should demonstrate similar long-term performance and cost-effectiveness. A number of agencies have made policy decisions to use continuously reinforced designs in their heavy urban traffic corridors.

A concrete road in Ewing, New Jersey. The original pavement was laid in the 1950s and has not been significantly altered since.
  • Continuously reinforced concrete pavements do not require any transverse contraction joints. Transverse cracks are expected in the slab, usually at intervals of 3 to 5 ft (0.91 to 1.52 m). These pavements are designed with enough steel, 0.6–0.7% by cross-sectional area, so that cracks are held together tightly. Determining an appropriate spacing between the cracks is part of the design process for this type of pavement.
  • Jointed reinforced concrete pavements contain steel mesh reinforcement (sometimes called distributed steel). In jointed reinforced concrete pavements, designers increase the joint spacing purposely, and include reinforcing steel to hold together intermediate cracks in each slab. The spacing between transverse joints is typically 30 feet (9.1 m) or more. In the past, some agencies used a spacing as great as 100 feet (30 m). During construction of the interstate system, most agencies in the Eastern and Midwestern United States laid jointed-reinforced pavement. Today only a handful of agencies employ this design, and its use is generally not recommended as both of the other types offer better performance and are easier to repair.
  • Jointed plain concrete pavements contain enough joints to control the location of all the expected shrinkage cracks. The concrete cracks at the joints and not elsewhere in the slabs. Jointed plain pavements do not contain any steel reinforcement. However, there may be smooth steel bars at transverse joints and deformed steel bars at longitudinal joints. The spacing between transverse joints is typically about 15 feet (4.6 m) for slabs 7 to 12 inches (180 to 300 mm) thick. Today, a majority of US state agencies build jointed plain pavements.

Concrete surfaces have been refined into three common types: jointed plain (JPCP), jointed reinforced (JRCP) and continuously reinforced (CRCP). The one item that distinguishes each type is the jointing system used to control crack development.

Concrete surfaces (specifically, Portland cement concrete) are created using a concrete mix of Portland cement, coarse aggregate, sand and water. In virtually all modern mixes there will also be various admixtures added to increase workability, reduce the required amount of water, mitigate harmful chemical reactions and for other beneficial purposes. In many cases there will also be Portland cement substitutes added, such as fly ash. This can reduce the cost of the concrete and improve its physical properties. The material is applied in a freshly mixed slurry, and worked mechanically to compact the interior and force some of the cement slurry to the surface to produce a smoother, denser surface free from honeycombing. The water allows the mix to combine molecularly in a chemical reaction called hydration.

Concrete roadway in San Jose, California


Study results of the long-term acoustic benefits of rubberized asphalt are inconclusive. Initial application of rubberized asphalt may provide 3-5 decibels (dB) reduction in tire-pavement source noise emissions; however, this translates to only 1-3 decibels (dB) in total traffic noise level reduction (due to the other components of traffic noise). Compared to traditional passive attenuating measures (e.g., noise walls and earth berms), rubberized asphalt provides shorter-lasting and lesser acoustic benefits at typically much greater expense.

In the 1960s, rubberized asphalt was used for the first time, mixing crumb rubber from used tires with asphalt. While a potential use for tires that would otherwise fill landfills and present a fire hazard, rubberized asphalt has shown greater incidence of wear in freeze-thaw cycles in temperate zones due to non-homogeneous expansion and contraction with non-rubber components. Also, application of rubberized asphalt is more temperature-sensitive, and in many locations can only be applied at certain times of the year.

An asphalt concrete surface will generally be constructed for high-volume primary highways having an average annual daily traffic load greater than 1200 vehicles per day.[6] Advantages of asphalt roadways include relatively low noise, relatively low cost compared with other paving methods, and perceived ease of repair. Disadvantages include less durability than other paving methods, less tensile strength than concrete, the tendency to become slick and soft in hot weather and a certain amount of hydrocarbon pollution to soil and groundwater or waterways.

[5] Cold mix asphalt is often used on lower volume rural roads, where hot mix asphalt would cool too much on the long trip from the asphalt plant to the construction site.[4]

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.