As the degree of the Taylor polynomial rises, it approaches the correct function. This image shows sin(x) and its Taylor approximations, polynomials of degree 1, 3, 5, 7, 9, 11 and 13.
The
exponential function e^{x} (in blue), and the sum of the first
n+1 terms of its Taylor series at 0 (in red).
In mathematics, a Taylor series is a representation of a function as an infinite sum of terms that are calculated from the values of the function's derivatives at a single point.
The concept of a Taylor series was discovered by the Scottish mathematician James Gregory and formally introduced by the English mathematician Brook Taylor in 1715. If the Taylor series is centered at zero, then that series is also called a Maclaurin series, named after the Scottish mathematician Colin Maclaurin, who made extensive use of this special case of Taylor series in the 18th century.
It is common practice to approximate a function by using a finite number of terms of its Taylor series. Taylor's theorem gives quantitative estimates on the error in this approximation. Any finite number of initial terms of the Taylor series of a function is called a Taylor polynomial. The Taylor series of a function is the limit of that function's Taylor polynomials, provided that the limit exists. A function may not be equal to its Taylor series, even if its Taylor series converges at every point. A function that is equal to its Taylor series in an open interval (or a disc in the complex plane) is known as an analytic function in that interval.
Definition
The Taylor series of a real or complexvalued function ƒ(x) that is infinitely differentiable at a real or complex number a is the power series

f(a)+\frac {f'(a)}{1!} (xa)+ \frac{f''(a)}{2!} (xa)^2+\frac{f^{(3)}(a)}{3!}(xa)^3+ \cdots.
which can be written in the more compact sigma notation as

\sum_{n=0} ^ {\infty} \frac {f^{(n)}(a)}{n!} \, (xa)^{n}
where n! denotes the factorial of n and ƒ^{ (n)}(a) denotes the nth derivative of ƒ evaluated at the point a. The derivative of order zero of ƒ is defined to be ƒ itself and (x − a)^{0} and 0! are both defined to be 1. When a = 0, the series is also called a Maclaurin series.
Examples
The Maclaurin series for any polynomial is the polynomial itself.
The Maclaurin series for (1 − x)^{−1} is the geometric series

1+x+x^2+x^3+\cdots\!
so the Taylor series for x^{−1} at a = 1 is

1(x1)+(x1)^2(x1)^3+\cdots.\!
By integrating the above Maclaurin series we find the Maclaurin series for log(1 − x), where log denotes the natural logarithm:

x\frac{1}{2}x^2\frac{1}{3}x^3\frac{1}{4}x^4\cdots\!
and the corresponding Taylor series for log(x) at a = 1 is

(x1)\frac{1}{2}(x1)^2+\frac{1}{3}(x1)^3\frac{1}{4}(x1)^4+\cdots,\!
and more generally, the corresponding Taylor series for log(x) at some a = x_{0} is:

\log ( x_0 ) + \frac{1}{x_0} ( x  x_0 )  \frac{1}{x_0^2}\frac{( x  x_0 )^2}{2} + \cdots.
The Taylor series for the exponential function e^{x} at a = 0 is

1 + \frac{x^1}{1!} + \frac{x^2}{2!} + \frac{x^3}{3!} + \frac{x^4}{4!} + \frac{x^5}{5!}+ \cdots = 1 + x + \frac{x^2}{2} + \frac{x^3}{6} + \frac{x^4}{24} + \frac{x^5}{120} + \cdots\! = \sum_{n=0}^\infty \frac{x^n}{n!}.
The above expansion holds because the derivative of e^{x} with respect to x is also e^{x} and e^{0} equals 1. This leaves the terms (x − 0)^{n} in the numerator and n! in the denominator for each term in the infinite sum.
History
The Greek philosopher Zeno considered the problem of summing an infinite series to achieve a finite result, but rejected it as an impossibility: the result was Zeno's paradox. Later, Aristotle proposed a philosophical resolution of the paradox, but the mathematical content was apparently unresolved until taken up by Democritus and then Archimedes. It was through Archimedes's method of exhaustion that an infinite number of progressive subdivisions could be performed to achieve a finite result.^{[1]} Liu Hui independently employed a similar method a few centuries later.^{[2]}
In the 14th century, the earliest examples of the use of Taylor series and closely related methods were given by Madhava of Sangamagrama.^{[3]}^{[4]} Though no record of his work survives, writings of later Indian mathematicians suggest that he found a number of special cases of the Taylor series, including those for the trigonometric functions of sine, cosine, tangent, and arctangent. The Kerala school of astronomy and mathematics further expanded his works with various series expansions and rational approximations until the 16th century.
In the 17th century, James Gregory also worked in this area and published several Maclaurin series. It was not until 1715 however that a general method for constructing these series for all functions for which they exist was finally provided by Brook Taylor,^{[5]} after whom the series are now named.
The Maclaurin series was named after Colin Maclaurin, a professor in Edinburgh, who published the special case of the Taylor result in the 18th century.
Analytic functions
The function e^{−1/x²} is not analytic at x = 0: the Taylor series is identically 0, although the function is not.
If f(x) is given by a convergent power series in an open disc (or interval in the real line) centered at b in the complex plane, it is said to be analytic in this disc. Thus for x in this disc, f is given by a convergent power series

f(x) = \sum_{n=0}^\infty a_n(xb)^n.
Differentiating by x the above formula n times, then setting x=b gives:

\frac{f^{(n)}(b)}{n!} = a_n
and so the power series expansion agrees with the Taylor series. Thus a function is analytic in an open disc centered at b if and only if its Taylor series converges to the value of the function at each point of the disc.
If f(x) is equal to its Taylor series for all x in the complex plane, it is called entire. The polynomials, exponential function e^{x}, and the trigonometric functions sine and cosine, are examples of entire functions. Examples of functions that are not entire include the square root, the logarithm, the trigonometric function tangent, and its inverse, arctan. For these functions the Taylor series do not converge if x is far from b. The Taylor series can be used to calculate the value of an entire function at every point, if the value of the function, and of all of its derivatives, are known at a single point.
Uses of the Taylor series for analytic functions include:

The partial sums (the Taylor polynomials) of the series can be used as approximations of the entire function. These approximations are good if sufficiently many terms are included.

Differentiation and integration of power series can be performed term by term and is hence particularly easy.

An analytic function is uniquely extended to a holomorphic function on an open disk in the complex plane. This makes the machinery of complex analysis available.

The (truncated) series can be used to compute function values numerically, (often by recasting the polynomial into the Chebyshev form and evaluating it with the Clenshaw algorithm).

Algebraic operations can be done readily on the power series representation; for instance, Euler's formula follows from Taylor series expansions for trigonometric and exponential functions. This result is of fundamental importance in such fields as harmonic analysis.

Approximations using the first few terms of a Taylor series can make otherwise unsolvable problems possible for a restricted domain; this approach is often used in physics.
Approximation and convergence
The sine function (blue) is closely approximated by its Taylor polynomial of degree 7 (pink) for a full period centered at the origin.
The Taylor polynomials for log(1 + x) only provide accurate approximations in the range −1 < x ≤ 1. Note that, for x > 1, the Taylor polynomials of higher degree are worse approximations.
The Taylor approximations for log(1+x) (black). For x > 1, any Taylor approximation is invalid.
Pictured on the right is an accurate approximation of sin(x) around the point x = 0. The pink curve is a polynomial of degree seven:

\sin\left( x \right) \approx x  \frac{x^3}{3!} + \frac{x^5}{5!}  \frac{x^7}{7!}.\!
The error in this approximation is no more than x^{9}/9!. In particular, for −1 < x < 1, the error is less than 0.000003.
In contrast, also shown is a picture of the natural logarithm function log(1 + x) and some of its Taylor polynomials around a = 0. These approximations converge to the function only in the region −1 < x ≤ 1; outside of this region the higherdegree Taylor polynomials are worse approximations for the function. This is similar to Runge's phenomenon.
The error incurred in approximating a function by its nthdegree Taylor polynomial is called the remainder or residual and is denoted by the function R_{n}(x). Taylor's theorem can be used to obtain a bound on the size of the remainder.
In general, Taylor series need not be convergent at all. And in fact the set of functions with a convergent Taylor series is a meager set in the Fréchet space of smooth functions. And even if the Taylor series of a function f does converge, its limit need not in general be equal to the value of the function f(x). For example, the function

f(x) = \begin{cases} e^{1/x^2}&\text{if } x\not=0\\ 0&\text{if } x=0 \end{cases}
is infinitely differentiable at x = 0, and has all derivatives zero there. Consequently, the Taylor series of f(x) about x = 0 is identically zero. However, f(x) is not the zero function, so does not equal its Taylor series around the origin.
In real analysis, this example shows that there are infinitely differentiable functions f(x) whose Taylor series are not equal to f(x) even if they converge. By contrast, the holomorphic functions studied in complex analysis always possess a convergent Taylor series, and even the Taylor series of meromorphic functions, which might have singularities, never converge to a value different from the function itself. The complex function e^{−z−2}, however, does not approach 0 when z approaches 0 along the imaginary axis, so it is not continuous in the complex plane and its Taylor series is undefined at 0.
More generally, every sequence of real or complex numbers can appear as coefficients in the Taylor series of an infinitely differentiable function defined on the real line, a consequence of Borel's lemma (see also Nonanalytic smooth function). As a result, the radius of convergence of a Taylor series can be zero. There are even infinitely differentiable functions defined on the real line whose Taylor series have a radius of convergence 0 everywhere.^{[6]}
Some functions cannot be written as Taylor series because they have a singularity; in these cases, one can often still achieve a series expansion if one allows also negative powers of the variable x; see Laurent series. For example, f(x) = e^{−x−2} can be written as a Laurent series.
Generalization
There is, however, a generalization^{[7]}^{[8]} of the Taylor series that does converge to the value of the function itself for any bounded continuous function on (0,∞), using the calculus of finite differences. Specifically, one has the following theorem, due to Einar Hille, that for any t > 0,

\lim_{h\to 0^+}\sum_{n=0}^\infty \frac{t^n}{n!}\frac{\Delta_h^nf(a)}{h^n} = f(a+t).
Here Δn
h is the nth finite difference operator with step size h. The series is precisely the Taylor series, except that divided differences appear in place of differentiation: the series is formally similar to the Newton series. When the function f is analytic at a, the terms in the series converge to the terms of the Taylor series, and in this sense generalizes the usual Taylor series.
In general, for any infinite sequence a_{i}, the following power series identity holds:

\sum_{n=0}^\infty\frac{u^n}{n!}\Delta^na_i = e^{u}\sum_{j=0}^\infty\frac{u^j}{j!}a_{i+j}.
So in particular,

f(a+t) = \lim_{h\to 0^+} e^{t/h}\sum_{j=0}^\infty f(a+jh) \frac{(t/h)^j}{j!}.
The series on the right is the expectation value of f(a + X), where X is a Poisson distributed random variable that takes the value jh with probability e^{−t/h}(t/h)^{j}/j!. Hence,

f(a+t) = \lim_{h\to 0^+} \int\limits_{\infty}^\infty f(a+x)dP_{t/h,h}(x).
The law of large numbers implies that the identity holds.
List of Maclaurin series of some common functions

See also List of mathematical series
An 8thdegree approximation of the cosine function in the
complex plane
The two above curves put together
Several important Maclaurin series expansions follow.^{[9]} All these expansions are valid for complex arguments x.
Exponential function

e^{x} = \sum^{\infty}_{n=0} \frac{x^n}{n!} = 1 + x + \frac{x^2}{2!} + \frac{x^3}{3!} + \cdots\quad\text{ for all } x\!
Natural logarithm:

\log(1\pm x) =  \sum^{\infty}_{n=1} \frac{(\mp x)^n}n\quad\text{ for } x < 1
Geometric series and its derivatives (see article for variants):

\frac{1}{1x} = \sum^\infty_{n=0} x^n\quad\text{ for }x < 1\!

\frac{1}{(1x)^2} = \sum^\infty_{n=1} nx^{n1}\quad\text{ for }x < 1\!

\frac{x}{(1x)^2} = \sum^\infty_{n=0} nx^n\quad\text{ for }x < 1\!

\frac{2}{(1x)^3} = \sum^\infty_{n=2} (n1)nx^{n2}\quad\text{ for }x < 1\!

\frac{2x^2}{(1x)^3} = \sum^\infty_{n=0} (n1)nx^n\quad\text{ for }x < 1\!
Binomial series (includes the square root for α = 1/2 and the infinite geometric series for α = −1):

(1+x)^\alpha = \sum_{n=0}^\infty {\alpha \choose n} x^n\quad\text{ for all }x < 1 \text{ and all complex } \alpha\!
with generalized binomial coefficients

{\alpha\choose n} = \prod_{k=1}^n \frac{\alphak+1}k = \frac{\alpha(\alpha1)\cdots(\alphan+1)}{n!}.
For instance, with the first several terms written out explicitly for the common square root cases, is:

(1+x)^{0.5} = \textstyle 1 + \frac{1}{2}x  \frac{1}{8}x^2 + \frac{1}{16}x^3  \frac{5}{128}x^4 + \frac{7}{256}x^5  \cdots

(1+x)^{0.5} = \textstyle 1 \frac{1}{2}x + \frac{3}{8}x^2  \frac{5}{16}x^3 + \frac{35}{128}x^4  \frac{63}{256}x^5 + \cdots
Trigonometric functions:

\sin x = \sum^{\infty}_{n=0} \frac{(1)^n}{(2n+1)!} x^{2n+1} = x  \frac{x^3}{3!} + \frac{x^5}{5!}  \cdots\quad\text{ for all } x\!

\cos x = \sum^{\infty}_{n=0} \frac{(1)^n}{(2n)!} x^{2n} = 1  \frac{x^2}{2!} + \frac{x^4}{4!}  \cdots\quad\text{ for all } x\!

\tan x = \sum^{\infty}_{n=1} \frac{B_{2n} (4)^n (14^n)}{(2n)!} x^{2n1} = x + \frac{x^3}{3} + \frac{2 x^5}{15} + \cdots\quad\text{ for }x < \frac{\pi}{2}\!

\sec x = \sum^{\infty}_{n=0} \frac{(1)^n E_{2n}}{(2n)!} x^{2n}\quad\text{ for }x < \frac{\pi}{2}\!

\arcsin x = \sum^{\infty}_{n=0} \frac{(2n)!}{4^n (n!)^2 (2n+1)} x^{2n+1}\quad\text{ for }x \le 1\!

\arccos x ={\pi\over 2}\arcsin x={\pi\over 2} \sum^{\infty}_{n=0} \frac{(2n)!}{4^n (n!)^2 (2n+1)} x^{2n+1}\quad\text{ for }x \le 1\!

\arctan x = \sum^{\infty}_{n=0} \frac{(1)^n}{2n+1} x^{2n+1}\quad\text{ for }x \le 1, x\not=\pm i\!
Hyperbolic functions:

\sinh x = \sum^{\infty}_{n=0} \frac{x^{2n+1}}{(2n+1)!} = x + \frac{x^3}{3!} + \frac{x^5}{5!} + \cdots\quad\text{ for all } x\!

\cosh x = \sum^{\infty}_{n=0} \frac{x^{2n}}{(2n)!} = 1 + \frac{x^2}{2!} + \frac{x^4}{4!} + \cdots\quad\text{ for all } x\!

\tanh x = \sum^{\infty}_{n=1} \frac{B_{2n} 4^n (4^n1)}{(2n)!} x^{2n1} = x\frac{1}{3}x^3+\frac{2}{15}x^5\frac{17}{315}x^7+\cdots \quad\text{ for }x < \frac{\pi}{2}\!

\mathrm{arsinh} (x) = \sum^{\infty}_{n=0} \frac{(1)^n (2n)!}{4^n (n!)^2 (2n+1)} x^{2n+1}\quad\text{ for }x \le 1\!

\mathrm{artanh} (x) = \sum^{\infty}_{n=0} \frac{x^{2n+1}}{2n+1} \quad\text{ for }x \le 1, x\not=\pm 1\!
The numbers B_{k} appearing in the summation expansions of tan(x) and tanh(x) are the Bernoulli numbers. The E_{k} in the expansion of sec(x) are Euler numbers.
Calculation of Taylor series
Several methods exist for the calculation of Taylor series of a large number of functions. One can attempt to use the definition of the Taylor series, though this often requires generalizing the form of the coefficients according to a readily apparent pattern. Alternatively, one can use manipulations such as substitution, multiplication or division, addition or subtraction of standard Taylor series to construct the Taylor series of a function, by virtue of Taylor series being power series. In some cases, one can also derive the Taylor series by repeatedly applying integration by parts. Particularly convenient is the use of computer algebra systems to calculate Taylor series.
First example
In order to compute the 7th degree Maclaurin polynomial for the function

f(x)=\log\cos x, \quad x\in(\pi/2, \pi/2)\!,
one may first rewrite the function as

f(x)=\log(1+(\cos x1))\!.
The Taylor series for the natural logarithm is (using the big O notation)

\log(1+x) = x  \frac{x^2}2 + \frac{x^3}3 + {O}(x^4)\!
and for the cosine function

\cos x  1 = \frac{x^2}2 + \frac{x^4}{24}  \frac{x^6}{720} + {O}(x^8)\!.
The latter series expansion has a zero constant term, which enables us to substitute the second series into the first one and to easily omit terms of higher order than the 7th degree by using the big O notation:

\begin{align}f(x)&=\log(1+(\cos x1))\\ &=\bigl(\cos x1\bigr)  \frac12\bigl(\cos x1\bigr)^2 + \frac13\bigl(\cos x1\bigr)^3+ {O}\bigl((\cos x1)^4\bigr)\\&=\biggl(\frac{x^2}2 + \frac{x^4}{24}  \frac{x^6}{720} +{O}(x^8)\biggr)\frac12\biggl(\frac{x^2}2+\frac{x^4}{24}+{O}(x^6)\biggr)^2+\frac13\biggl(\frac{x^2}2+O(x^4)\biggr)^3 + {O}(x^8)\\ & =\frac{x^2}2 + \frac{x^4}{24}\frac{x^6}{720}  \frac{x^4}8 + \frac{x^6}{48}  \frac{x^6}{24} +O(x^8)\\ & = \frac{x^2}2  \frac{x^4}{12}  \frac{x^6}{45}+O(x^8). \end{align}\!
Since the cosine is an even function, the coefficients for all the odd powers x, x^{3}, x^{5}, x^{7}, ... have to be zero.
Second example
Suppose we want the Taylor series at 0 of the function

g(x)=\frac{e^x}{\cos x}.\!
We have for the exponential function

e^x = \sum^\infty_{n=0} {x^n\over n!} =1 + x + {x^2 \over 2!} + {x^3 \over 3!} + {x^4 \over 4!}+\cdots\!
and, as in the first example,

\cos x = 1  {x^2 \over 2!} + {x^4 \over 4!}  \cdots\!
Assume the power series is

{e^x \over \cos x} = c_0 + c_1 x + c_2 x^2 + c_3 x^3 + \cdots\!
Then multiplication with the denominator and substitution of the series of the cosine yields

\begin{align} e^x &= (c_0 + c_1 x + c_2 x^2 + c_3 x^3 + \cdots)\cos x\\ &=\left(c_0 + c_1 x + c_2 x^2 + c_3 x^3 + c_4x^4 + \cdots\right)\left(1  {x^2 \over 2!} + {x^4 \over 4!}  \cdots\right)\\&=c_0  {c_0 \over 2}x^2 + {c_0 \over 4!}x^4 + c_1x  {c_1 \over 2}x^3 + {c_1 \over 4!}x^5 + c_2x^2  {c_2 \over 2}x^4 + {c_2 \over 4!}x^6 + c_3x^3  {c_3 \over 2}x^5 + {c_3 \over 4!}x^7 +\cdots \end{align}\!
Collecting the terms up to fourth order yields

=c_0 + c_1x + \left(c_2  {c_0 \over 2}\right)x^2 + \left(c_3  {c_1 \over 2}\right)x^3+\left(c_4{c_2\over 2}+{c_0 \over 4!}\right)x^4 + \cdots\!
Comparing coefficients with the above series of the exponential function yields the desired Taylor series

\frac{e^x}{\cos x}=1 + x + x^2 + {2x^3 \over 3} + {x^4 \over 2} + \cdots.\!
Third example
Here we use a method called "Indirect Expansion" to expand the given function. This method uses the known Taylor expansion of the exponential function. In order to expand

(1 + x)e^x
as a Taylor series in x, we use the known Taylor series of function e^x:

e^x = \sum^\infty_{n=0} {x^n\over n!} =1 + x + {x^2 \over 2!} + {x^3 \over 3!} + {x^4 \over 4!}+\cdots\!, \infty
Thus,

\begin{align}(1+x)e^x &= e^x + xe^x = \sum^\infty_{n=0} {x^n\over n!} + \sum^\infty_{n=0} {x^{n+1}\over n!} = 1 + \sum^\infty_{n=1} {x^n\over n!} + \sum^\infty_{n=0} {x^{n+1}\over n!} \\ &= 1 + \sum^\infty_{n=1} {x^n\over n!} + \sum^\infty_{n=1} {x^{n}\over (n1)!} =1 + \sum^\infty_{n=1}\left({1\over n!} + {1\over (n1)!}\right)x^n \\ &= 1 + \sum^\infty_{n=1}{n+1\over n!}x^n\\ &= \sum^\infty_{n=0}{n+1\over n!}x^n\end{align}
Taylor series as definitions
Classically, algebraic functions are defined by an algebraic equation, and transcendental functions (including those discussed above) are defined by some property that holds for them, such as a differential equation. For example, the exponential function is the function which is equal to its own derivative everywhere, and assumes the value 1 at the origin. However, one may equally well define an analytic function by its Taylor series.
Taylor series are used to define functions and "operators" in diverse areas of mathematics. In particular, this is true in areas where the classical definitions of functions break down. For example, using Taylor series, one may define analytical functions of matrices and operators, such as the matrix exponential or matrix logarithm.
In other areas, such as formal analysis, it is more convenient to work directly with the power series themselves. Thus one may define a solution of a differential equation as a power series which, one hopes to prove, is the Taylor series of the desired solution.
Taylor series in several variables
The Taylor series may also be generalized to functions of more than one variable with

\begin{align} & T(x_1,\dots,x_d)\\ = {} & \sum_{n_1=0}^\infty \sum_{n_2=0}^\infty \cdots \sum_{n_d = 0}^\infty \frac{(x_1a_1)^{n_1}\cdots (x_da_d)^{n_d}}{n_1!\cdots n_d!}\,\left(\frac{\partial^{n_1 + \cdots + n_d}f}{\partial x_1^{n_1}\cdots \partial x_d^{n_d}}\right)(a_1,\dots,a_d) \\ = {} & f(a_1, \dots,a_d) + \sum_{j=1}^d \frac{\partial f(a_1, \dots,a_d)}{\partial x_j} (x_j  a_j) \\ & {} + \frac{1}{2!} \sum_{j=1}^d \sum_{k=1}^d \frac{\partial^2 f(a_1, \dots,a_d)}{\partial x_j \partial x_k} (x_j  a_j)(x_k  a_k) \\ & {} + \frac{1}{3!} \sum_{j=1}^d\sum_{k=1}^d\sum_{l=1}^d \frac{\partial^3 f(a_1, \dots,a_d)}{\partial x_j \partial x_k \partial x_l} (x_j  a_j)(x_k  a_k)(x_l  a_l) + \dots \end{align}
For example, for a function that depends on two variables, x and y, the Taylor series to second order about the point (a, b) is

\begin{align} f(a,b) &+(xa)\, f_x(a,b) +(yb)\, f_y(a,b) \\ &+ \frac{1}{2!}\left[ (xa)^2\,f_{xx}(a,b) + 2(xa)(yb)\,f_{xy}(a,b) +(yb)^2\, f_{yy}(a,b) \right] \end{align}
where the subscripts denote the respective partial derivatives.
A secondorder Taylor series expansion of a scalarvalued function of more than one variable can be written compactly as

T(\mathbf{x}) = f(\mathbf{a}) + \mathrm{D} f(\mathbf{a})^\mathrm{T} (\mathbf{x}  \mathbf{a}) + \frac{1}{2!} (\mathbf{x}  \mathbf{a})^\mathrm{T} \,\{\mathrm{D}^2 f(\mathbf{a})\}\,(\mathbf{x}  \mathbf{a}) + \cdots\! \,,
where D f(\mathbf{a})\! is the gradient of \,f evaluated at \mathbf{x} = \mathbf{a} and D^2 f(\mathbf{a})\! is the Hessian matrix. Applying the multiindex notation the Taylor series for several variables becomes

T(\mathbf{x}) = \sum_{\alpha \ge 0}^{}\frac{(\mathbf{x}\mathbf{a})^{\alpha}}{\alpha !}\,({\mathrm{\partial}^{\alpha}}\,f)(\mathbf{a})\,,
which is to be understood as a still more abbreviated multiindex version of the first equation of this paragraph, again in full analogy to the single variable case.
Example
Secondorder Taylor series approximation (in orange) of a function f(x,y) = e^x\log{(1+y)} around origin.
Compute a secondorder Taylor series expansion around point (a, b) = (0, 0) of a function

f(x,y)=e^x\log(1+y).\,
Firstly, we compute all partial derivatives we need

f_x(a,b)=e^x\log(1+y)\bigg_{(x,y)=(0,0)}=0\,,

f_y(a,b)=\frac{e^x}{1+y}\bigg_{(x,y)=(0,0)}=1\,,

f_{xx}(a,b)=e^x\log(1+y)\bigg_{(x,y)=(0,0)}=0\,,

f_{yy}(a,b)=\frac{e^x}{(1+y)^2}\bigg_{(x,y)=(0,0)}=1\,,

f_{xy}(a,b)=f_{yx}(a,b)=\frac{e^x}{1+y}\bigg_{(x,y)=(0,0)}=1.
The Taylor series is

\begin{align} T(x,y) = f(a,b) & +(xa)\, f_x(a,b) +(yb)\, f_y(a,b) \\ &+\frac{1}{2!}\left[ (xa)^2\,f_{xx}(a,b) + 2(xa)(yb)\,f_{xy}(a,b) +(yb)^2\, f_{yy}(a,b) \right]+ \cdots\,,\end{align}
which in this case becomes

\begin{align}T(x,y) &= 0 + 0(x0) + 1(y0) + \frac{1}{2}\Big[ 0(x0)^2 + 2(x0)(y0) + (1)(y0)^2 \Big] + \cdots \\ &= y + xy  \frac{y^2}{2} + \cdots. \end{align}
Since log(1 + y) is analytic in y < 1, we have

e^x\log(1+y)= y + xy  \frac{y^2}{2} + \cdots
for y < 1.
Comparison with Fourier series
The trigonometric Fourier series enables one to express a periodic function (or a function defined on a compact interval) as an infinite sum of trigonometric functions (sines and cosines). In this sense, the Fourier series is analogous to Taylor series, since the latter allows to express a function as an infinite sum of powers. Nevertheless both types of series differ in several relevant issues:

The computation of Taylor series requires the knowledge of the function on an arbitrary small neighbourhood of a point, whereas the computation of the Fourier series requires knowing the function on its whole domain interval. In a certain sense one could say that the Taylor series is "local" and the Fourier series is "global."

The computation of the Taylor series requires the function to be of class C^{∞}, whereas that of Fourier series only requires the function to be integrable (and thus may not even be continuous).

The convergence of both series has very different properties. Even if the Taylor series has positive convergence radius, the resulting series may not coincide with the function; but if the function is analytic then the series converges pointwise to the function, and uniformly on every compact set. Concerning the Fourier series, if the function is squareintegrable then the series converges in quadratic mean, but additional requirements are needed to ensure the pointwise or uniform convergence (for instance, if the function is periodic and of class C^{1} then the convergence is uniform).

Finally, in practice one wants to approximate the function with a finite number of terms, let's say with a Taylor polynomial or a partial sum of the trigonometric series, respectively. In the case of the Taylor series the error is very small in a neighbourhood of the point where it is computed, while it may be very large at a distant point. In the case of the Fourier series the error is distributed along the domain of the function.
See also
Notes

^ Kline, M. (1990). Mathematical Thought from Ancient to Modern Times. New York: Oxford University Press. pp. 35–37.

^ Boyer, C.; Merzbach, U. (1991). A History of Mathematics (Second revised ed.). John Wiley and Sons. pp. 202–203.

^ "Neither Newton nor Leibniz – The PreHistory of Calculus and Celestial Mechanics in Medieval Kerala". MAT 314. Canisius College. Retrieved 20060709.

^ S. G. Dani (2012). "Ancient Indian Mathematics – A Conspectus". Resonance 17 (3): 236–246.

^ Taylor, Brook, Methodus Incrementorum Directa et Inversa [Direct and Reverse Methods of Incrementation] (London, 1715), pages 21–23 (Proposition VII, Theorem 3, Corollary 2). Translated into English in D. J. Struik, A Source Book in Mathematics 1200–1800 (Cambridge, Massachusetts: Harvard University Press, 1969), pages 329–332.

^

^ .

^ .

^ Most of these can be found in (Abramowitz & Stegun 1970).
References
External links

Hazewinkel, Michiel, ed. (2001), "Taylor series",

Weisstein, Eric W., "Taylor Series", MathWorld.

Taylor polynomial  practical introduction

Madhava of Sangamagramma

Taylor Series Representation Module by John H. Mathews

"Discussion of the ParkerSochacki Method"

Another Taylor visualisation — where you can choose the point of the approximation and the number of derivatives

Taylor series revisited for numerical methods at Numerical Methods for the STEM Undergraduate

Cinderella 2: Taylor expansion

Taylor series

Inverse trigonometric functions Taylor series
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.