World Library  
Flag as Inappropriate
Email this Article

Timber bridge

Article Id: WHEBN0035607301
Reproduction Date:

Title: Timber bridge  
Author: World Heritage Encyclopedia
Language: English
Subject: Bogoda Wooden Bridge, Indian River Inlet Bridge, Underspanned suspension bridge, Delaware Route 14, List of longest continuous truss bridge spans
Publisher: World Heritage Encyclopedia

Timber bridge

Truss bridge
Material wood, with a steel center truss
Beam bridge
Material wood
Trestles are useful as approaches to bridges over marshes and shallows
Trestles are useful as approaches to bridges over marshes and shallows
Material Timber, iron, steel, reinforced concrete, prestressed concrete

A Timber bridge or wooden bridge is a bridge that uses timber or wood as its principal structural material. One of the first forms of bridge, those of timber have been used since ancient times.


Holzbrücke Rapperswil-Hurden, possibly one of the oldest timber bridge in the world.

Most ancient form of timber bridges are log bridges, employed by letting trees fall over the river.

Among the oldest timber bridge is the Holzbrücke Rapperswil-Hurden crossing upper Lake Zürich in Switzerland; the prehistoric timber piles discovered to the west of the Seedamm date back to 1523 BC. The first wooden footbridge led across Lake Zürich, followed by several reconstructions at least until the late 2nd century AD. when the Roman Empire built a 6 metres (20 ft) wide wooden bridge. Between 1358 and 1360, Rudolf IV, Duke of Austria, built a 'new' wooden bridge across the lake that has been used to 1878 – measuring approximately 1,450 metres (4,760 ft) in length and 4 metres (13 ft) wide. On April 6, 2001, the reconstructed wooden footbridge was opened, being the longest wooden bridge in Switzerland. The Kapellbrücke is a 204 metres (669 ft) long bridge crossing the Reuss River in the city of Lucerne in Switzerland. It is the oldest wooden covered bridge in Europe, and one of Switzerland's main tourist attractions.


Recently timber bridges have received attention in the United States because they are environmentally friendly compared to other bridge types. Until 1991, the Federal Highway Administration has concentrated on major highways and other primary roads; rural highways and local roads, where timber bridges are mostly found, have received less attention.

Local and state agencies prefer timber bridges because timber is a renewable resource, it is relatively economical, and there have been rapid improvements in design, construction, and preservative treatment. The US Congress emphasized timber bridges by passing the Timber Bridge Initiative (TBI) in 1988 and the Intermodal Surface Transportation and Efficiency Act (ISTEA) in 1991.[1][2]

Covered bridges, usually made of wood and enclosed as if a tunnel, were very popular in the 19th century in the US. Today, timber bridges are promoted as environmentally friendly, and as a way to protect water quality and the habitat along waterways. Timber bridges can be placed over small streams or channels with firm, stable banks.[3]

The passing of TBI and ISTEA by the US Congress has provided an impetus to identify and develop standard designs for timber bridges, which the US Forest Service has done.[4] The US Forest Service has designed standardized plans for timber bridge superstructures made of treated lumber.[1]


The University of Minnesota Extension Service recommends three types of timber bridges for wilderness lands, and suggest that a licensed engineer be hired to insure the bridge design is safe appropriate for the site. Using fallen trees, stringer bridges can be built. Wood laminated by stress, glued, dowels, or nails lumber are good for panel bridges. New lumber and wood scavenged from buildings and railroad ties can be used to build stringer bridges.[3] A licensed engineer can help operators design a safe, appropriate timber bridge.

Personnel from Virginia Tech have described in detail how to built a stringer bridge using standard bridge design procedures, for example, by placing timber stringers across the abutment, using a bent to support a trestle or timber frame. Their methods are quick and cost little.[5]


  1. ^ a b Wacker, James P.; Smith, Matthew S. (2001). "Standard plans for timber bridge superstructures". Forest Products Laboratory. Madison: Department of Agriculture, Forest Service. p. 53. 
  2. ^ Sheila Rimal Duwadi; Robert C. Wood. "The Federal Highway Administration Timber Bridge Program". Retrieved April 28, 2012. 
  3. ^ a b "Timber Bridges". University of Minnesota. 2002. Retrieved April 24, 2012. 
  4. ^ James Wacher; Mathew Smith. "Standard Plans for Timber Bridge Structures". Forest Products Laboratory. Retrieved April 24, 2012. 
  5. ^ "Timber Stringer Bridge". Virginia Tech. Retrieved April 24, 2012. 

External links

  • Media related to at Wikimedia Commons
  • Video on building Chinese wooden bridges by UNESCO
  • USFS Timber Bridge Manual
  • Timber Bridge Economics
  • Types of Timber Bridges
  • Modern Timber Bridges: An Alternative for Mississippi
  • Future of timber bridges under review
  • Timber Bridges in the United States
  • Best Management Practices for the Use of Preservative-Treated Wood in Aquatic Environments in Michigan - 2000
  • Projects of CFC - Timber - Western Virginia University
  • Google on Timber Initiative
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.