World Library  
Flag as Inappropriate
Email this Article

Tractor configuration

Article Id: WHEBN0001028296
Reproduction Date:

Title: Tractor configuration  
Author: World Heritage Encyclopedia
Language: English
Subject: Royal Aircraft Factory B.E.2, Categories for discussion/Log/2013 March 27, Aviation in World War I, Blériot Aéronautique, Bonomi BS.19 Alca
Collection: Aircraft Configurations, Tractor Aircraft
Publisher: World Heritage Encyclopedia

Tractor configuration

Aerotechnik EV97A Eurostar, a tractor configuration aircraft, being pulled into position by its pilot for refuelling.
A Britten-Norman Trislander aircraft (with a 3rd tractor engine on the tail) at Guernsey Airport, Channel Islands.

An aircraft constructed with a tractor configuration has the engine mounted with the propeller in front of it so that the aircraft is "pulled" through the air, as opposed to the pusher configuration, in which the propeller is behind the engine and "pushes" the aircraft forward.

In the early years of powered aviation both tractor and pusher designs were common. However, by the midpoint of the First World War, interest in pushers declined and the tractor configuration dominated. Today, propeller-driven aircraft are assumed to be tractors unless it is stated otherwise.


  • Early usage of term 1
  • World War I military aviation 2
  • References 3
  • See also 4

Early usage of term

As early as 1910, in the early years of flying, a distinction was made between a propeller ("pushes the machine", akin to a ship's propeller) and a tractor-[air]screw ("pulls the machine through the air").[1] The Royal Flying Corps called the tractors "Bleriot type" after Louis Bleriot to distinguish them from pushers, or "Farman type".

World War I military aviation

From a military perspective, the problem with single-engine tractor aircraft was that it was not possible to fire a gun through the propeller arc without striking the propeller blades with bullets. Early solutions included mounting guns (rifles or machine guns) to fire around the propeller arc, either at an angle to the side – which made aiming difficult – or on the top wing of a biplane so that the bullets passed over the top of the propeller.

The first system to fire through the propeller was developed by French engineer Eugene Gilbert for Morane-Saulnier and involved fitting metal "deflector wedges" to the propeller blades of a Morane-Saulnier L monoplane. It was employed with immediate success by French aviator Roland Garros and was also used on at least one Sopwith Tabloid of the Royal Naval Air Service.

The final solution was the synchronization gear, more properly known as a gun synchronizer, developed by Anthony Fokker and fitted to the Fokker E.I monoplane in 1915. The first British "tractor" to be specifically designed to be fitted with synchronization gear was the Sopwith 1½ Strutter which did not enter service until early 1916.

Other solutions to avoiding the propeller arc include passing the gun's barrel through the propeller's hub or spinner (the nose of the aircraft) – first used in production military aircraft with the World War I French SPAD S.XII – or mounting guns in the wings. The latter solution was generally used from the early 1930s until the beginning of the jet age.


  1. ^ "Propellers and tractor-screws" Correspondence Flight 23 April 1910.

See also

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.