World Library  
Flag as Inappropriate
Email this Article

Vinyl Chloride Monomer

Article Id: WHEBN0005195569
Reproduction Date:

Title: Vinyl Chloride Monomer  
Author: World Heritage Encyclopedia
Language: English
Subject: River Wyre, National Pollutant Inventory
Collection:
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Vinyl Chloride Monomer

Vinyl chloride
Identifiers
CAS number 75-01-4 YesY
PubChem 6338
ChemSpider 6098 YesY
KEGG C06793 YesY
ChEBI CHEBI:28509 YesY
Jmol-3D images Image 1
Properties
Appearance Colorless gas
Density 0.911 g/ml
Melting point

−153.8 °C, 119 K, -245 °F

Boiling point

−13.4 °C, 260 K, 8 °F

Solubility in water 2.7 g/L (0.0432 mol/L)
Thermochemistry
Std enthalpy of
formation
ΔfHo298
−94.12 kJ/mol (solid)
Specific heat capacity, C 0.8592 J/K/g (gas)
0.9504 J/K/g (solid)
Hazards
EU Index 602-023-00-7
EU classification T
R-phrases R12, R45
S-phrases S45, S53
NFPA 704
4
3
2
Flash point −61 °C (−78 °F)
 YesY (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Vinyl chloride is the organochloride with the formula H2C=CHCl. It is also called vinyl chloride monomer, VCM or chloroethene. This colorless compound is an important industrial chemical chiefly used to produce the polymer polyvinyl chloride (PVC).[1] About 13 billion kilograms are produced annually. VCM is among the top twenty largest petrochemicals (petroleum-derived chemicals) in world production. The United States currently remains the largest VCM manufacturing region because of its low-production-cost position in chlorine and ethylene raw materials. China is also a large manufacturer and one of the largest consumers of VCM.[2] Vinyl chloride is a gas with a sweet odor. It is highly toxic, flammable, and carcinogenic. It can be formed in the environment when soil organisms break down "chlorinated" solvents. Vinyl chloride that is released by industries or formed by the breakdown of other chlorinated chemicals can enter the air and drinking water supplies. Vinyl chloride is a common contaminant found near landfills.[3] In the past VCM has been used as a refrigerant.[4]

Production

Vinyl chloride was first produced in 1835 by Justus von Liebig and his student Henri Victor Regnault. They obtained it by treating 1,2-dichloroethane with a solution of potassium hydroxide in ethanol.

In 1912, Frans, a German chemist working for Griesheim-Elektron, patented a means to produce vinyl chloride from acetylene and hydrogen chloride using mercuric chloride as a catalyst. While this method was widely used during the 1930s and 1940s in the West, it has since been superseded by more economical processes based on ethylene in the United States and Europe. It remains the main production method in China.

Vinyl chloride is produced on a substantial scale—approximately 31.1 million tons (7.5 Bel tons) were produced in 2000.[5] Two methods are employed, the hydrochlorination of acetylene and the dehydrochlorination of ethylene dichloride (1,2-dichloroethane). Numerous attempts have been made to convert ethane directly to vinyl chloride.[1]

Vinyl chloride can also be obtained as byproducts in the synthesis of chlorofluorocarbons when saturated chlorofluorocarbons are catalytically dechlorinated by ethylene. Ethane sulphochlorination has been proposed as a route to produce vinyl chloride using sulphur instead of oxygen.[1]

Production from ethylene

About 95% of vinyl chloride is produced by an integrated set of reactions starting with chlorine, ethylene, and air. Two processes are used to generate 1,2-dichloroethane (EDC). The expected consumption for raw materials and utilities per 1000 kg VCM product are:[6]

Raw material Amount required
Ethylene 459 kg
Chlorine 575 kg
Oxygen 139 kg
Steam 250 kg
Fuel gas 2.7 GJ

Direct chlorination

EDC is prepared by reacting ethylene and chlorine.[7] In the presence of iron(III) chloride as a catalyst, these compounds react exothermically:

CH2=CH2 + Cl2 → ClCH2CH2Cl

This process results in high purity EDC and high yields. Dissolved catalyst and moisture must be removed before EDC enters the vinyl chloride production process.

Oxychlorination

Vinyl chloride plants use recycled HCl to produce more EDC via oxychlorination, which entails the reaction of ethylene, oxygen, and hydrogen chloride over a copper(II) chloride catalyst to produce EDC:

CH2=CH2 + 2 HCl + ½ O2 → ClCH2CH2Cl + H2O.

The reaction is highly exothermic.

Due to the relatively low cost of ethylene, compared to acetylene, most vinyl chloride has been produced via this technique since the late 1950s. This is despite the lower yields, lower product purity and higher costs for waste treatment. By-products of the oxychlorination reaction, may be recovered, as feedstocks for chlorinated solvents production. One useful byproduct of the oxychlorination is ethyl chloride, a topical anesthetic.

Thermal cracking

When heated to 500 °C at 15–30 atm (1.5 to 3 MPa) pressure, EDC vapor decomposes to produce vinyl chloride and anhydrous HCl.

ClCH2CH2Cl → CH2=CHCl + HCl

The thermal cracking reaction is highly endothermic, and is generally carried out in a fired heater. Even though residence time and temperature are carefully controlled, it produces significant quantities of chlorinated hydrocarbon side products. In practice, EDC conversion is relatively low (50 to 60 percent). The furnace effluent is immediately quenched with cold EDC to stop undesirable side reactions. The resulting vapor-liquid mixture then goes to a purification system. Some processes use an absorber-stripper system to separate HCl from the chlorinated hydrocarbons, while other processes use a refrigerated continuous distillation system.

Waste treatment

For environmental reasons, the acidic aqueous wastestream is treated to remove organic compounds and neutralized before it can be sent to the plant's "outfall". An outfall is a monitored wastewater stream that must conform to the plant's standards. Some very hazardous wastes are generated in the recovery of the product vinyl chloride. These wastes require specialized procedures. These wastes are burned onsite in hazardous waste burners that again are subject to strict standards.

Production from acetylene

Acetylene reacts with anhydrous hydrogen chloride gas over a mercuric chloride catalyst to give vinyl chloride:

C2H2 + HCl → CH2=CHCl

The reaction is exothermic and highly selective. Product purity and yields are generally very high.

This industrial route to vinyl chloride was common before ethylene became widely distributed. When vinyl chloride producers shifted to using the thermal cracking of EDC described above, some used byproduct HCl in conjunction with a colocated acetylene-based unit. The hazards of storing and shipping acetylene meant that the vinyl chloride facility needed to be located very close to the acetylene generating facility. China still uses this method to produce vinyl chloride due to the large reserves of coal from which acetylene is produced.[2]

Production from ethane

Ethane is readily available, particularly on the U.S. gulf coast. Ethylene is made from ethane by cracking ethane and then ethylene is used for production of vinyl chloride. Hence, to save the processing cost for manufacturing ethylene, numerous attempts have been made to convert ethane directly to vinyl chloride. The direct feed of ethane to vinyl chloride plants could, thus, considerably decrease the raw material costs and make the plants less dependent on cracker capacity. The conversion of ethane to vinyl chloride can be performed by various routes:[8]

High-temperature chlorination:

C2H6 + 2 Cl2 → C2H3Cl + 3 HCl

High-temperature oxychlorination:

C2H6 + HCl + O2 → C2H3Cl + 2 H2O

High-temperature oxidative chlorination:

2 C2H6 + 3/2 O2 + Cl2 → C2H3Cl + 3 H2O

A major drawback to the use of ethane are the forcing conditions required for its use, which can be attributed to its lack of molecular functionality. In contrast to ethylene, which easily undergoes chlorine addition, ethane must first be functionalized by substitution reactions, which gives rise to a variety of consecutive and side-chain reactions. The reaction must, therefore, be kinetically controlled in order to obtain a maximal vinyl chloride yield. Vinyl chloride yields average 20–50% per pass. Ethylene, ethyl chloride, and 1,2-dichloroethane are obtained as major byproducts With special catalysts and at optimized conditions, however, ethane conversions of greater 96% have been reported from oxychlorination reactions. Ethylene, ethyl chloride, and 1,2-dichloroethane are obtained as major byproducts. The ethylene formed can either be recycled or oxychlorinated and cracked in a conventional manner. Many such ethane based processes have been and are being developed.

Storage and Transportation

Vinyl chloride is stored as a liquid. The presently accepted upper limit of safety as a health hazard is 500 ppm. Often, the storage containers for the product vinyl chloride are high capacity spheres. The spheres have an inside sphere and an outside sphere. Several inches of empty space separate the inside sphere from the outside sphere. This void area between the spheres is purged with an inert gas such as nitrogen. As the nitrogen purge gas exits the void space it passes through an analyzer that is designed to detect if any vinyl chloride is leaking from the internal sphere. If vinyl chloride starts to leak from the internal sphere or if a fire is detected on the outside of the sphere then the contents of the sphere are automatically dumped into an emergency underground storage container. Containers used for handling vinyl chloride at atmospheric temperature are always under pressure. Inhibited vinyl chloride may be stored at normal atmospheric conditions in suitable pressure vessel. Uninhibited vinyl chloride may be stored either under refrigeration or at normal atmospheric temperature in the absence of air or sunlight but only for a duration of a few days. If for longer periods, regular checks should be made for the presence of polymers.[9] Transporting VCM presents the same risks as transporting other flammable gases such as propane, butane (LPG) or natural gas (for which the same safety regulations apply).The equipment used for VCM transport is specially designed to be impact and corrosion resistant.[10]

Companies associated with Vinyl Chloride production

Ethylene can be converted to vinyl chloride by direct chlorination and subsequent thermal cracking. The first large scale production units for this route were first constructed by Dow Chemical Co., Monsanto Chemical Co. and the Shell Oil Co. The complete changeover to the exclusive use of ethylene as a feedstock became possible when the large-scale oxychlorination of ethylene to 1,2-dichloroethane had been proven to be technically feasible by Dow Chemical in the period 1955 – 1958. Since then, most plants now are using integrated, balanced DC– EDC – Oxy – EDC –VCM processes and more than 90% of the vinyl chloride chloride presently produced in the Western World is based exclusively on ethylene.[8]

Market Analysis and Economics

Demand

The increase in demand for polyvinyl chloride (PVC) results in an increase in the demand for vinyl chloride monomer (VCM). It is found that the demand of the vinyl chloride monomer will be estimated to be approximately 4.1 billion pounds per year within the next three years, 6.4 billion pounds per year in five years, and 10.5 billion pounds per year in the next eight years.

Economic Analysis

The capacity of 6.4 billion pounds per year is chosen in order to meet the demand of VCM for the next five years. The total plant cost is approximated from the total capital investment, total product cost, and environmental cost. The capital investment from the total equipment cost is found using the “Ratio Factor” method described in Peters and Timmerhaus. The production cost is the cost associated with plant operation. The environmental cost includes installing and running the vapor/liquid waste treatment and the waste water treatment. The total equipment cost for the capacity of 6.4 billlion pounds per year is found to be $14.5 million. The total production cost is found to be $1.6 billion per year. The net profit is $27.5 million per year.[11]

Uses

Vinyl chloride is a chemical intermediate, not a final product. Due to the hazardous nature of vinyl chloride to human health there are no end products that use vinyl chloride in its monomer form. Polyvinyl chloride is very stable, storable, and nowhere near as acutely hazardous as the monomer.

Vinyl chloride liquid is fed to polymerization reactors where it is converted from a monomer to a polymer PVC. The final product of the polymerization process is PVC in either a flake or pellet form. From its flake or pellet form PVC is sold to companies that heat and mold the PVC into end products such as PVC pipe and bottles. Tens of billions of pounds of PVC are sold on the global market each year.

Until 1974, vinyl chloride was used in aerosol spray propellant. Prior to the removal of vinyl chloride from hair spray the accumulation of vinyl chloride vapor in hair salons may have exceeded the NOAEL (No Observable Adverse Effect Level) exposure guidelines.

Vinyl chloride was briefly used as an inhalational anaesthetic, in a similar vein to ethyl chloride, though its toxicity forced this practice to be abandoned.

Smaller amounts of vinyl chloride are used in furniture and automobile upholstery, wall coverings, housewares, and automotive parts. Vinyl chloride has also been used in the past as a refrigerant.[12]

Fire and explosion hazard

In the U.S., OSHA lists vinyl chloride as a Class IA Flammable Liquid, with an National Fire Protection Association Flammability Rating of 4. Because of its low boiling point, liquid VCM will undergo flash evaporation (i.e., autorefrigerate) upon its release to atmospheric pressure. The portion vaporized will form a dense cloud (more than twice as heavy as the surrounding air). The risk of subsequent explosion or fire is significant. According to OSHA, the flash point of vinyl chloride is −78 °C (−108.4 °F).[13] Its flammable limits in air are: lower 3.6 volume% and upper 33.0 volume%. The explosive limits are: lower 4.0%, upper 22.05 by volume in air. Fire may release toxic hydrogen chloride (HCl) and carbon monoxide (CO).[14] VCM can polymerise rapidly due to heating and under the influence of air, light and contact with a catalyst, strong oxidisers and metals such as copper and aluminium, with fire or explosion hazard. As a gas mixed with air, VCM is a fire and explosion hazard. On standing VCM can form peroxides, which may then explode. VCM will react with iron and steel in the presence of moisture.[4][15] Vinyl chloride is a gas at normal atmospheric temperature and pressure.

Health effects

Vinyl chloride is flammable emitting corrosive hydrogen chloride and toxic phosgene in the process.

The hepatotoxicity of vinyl chloride has long been established since the 1930s when the PVC industry was just in its infant stages. In the very first study about the dangers of vinyl chloride, published by Patty in 1930, it was disclosed that exposure of test animals to just a single short-term high dose of vinyl chloride caused liver damage.[16] In 1949, a Russian publication by Tribukh discussed the finding that vinyl chloride caused liver injury among workers.[17] In 1954, Rex Wilson, Medical Director, and William McCormick, Industrial Hygienist and Toxicologist, both of B.F. Goodrich Chemical, stated that vinyl chloride caused liver injury upon short-term exposures. Almost nothing was known about its long-term effects. They also recommended that long-term animal toxicology studies. The study noted that if a chemical did not justify the cost of testing, and its ill-effects on workers and the public were known, the chemical should not be made.[18] Thereafter, in 1963, Lester and Greenberg published an article reporting their findings from research paid for in part by Allied Chemical. They too found liver damage in test animals from exposures below 500 parts per million (ppm).[19] Then, in 1963, a Romanian researcher, Suciu, published his findings of liver disease in vinyl chloride workers.[20] In 1968, Mutchler and Kramer, two Dow researchers, reported their finding that exposures as low as 300 ppm caused liver damage in vinyl chloride workers thus confirming earlier animal data in humans.[21] In a 1969 presentation given in Japan, P. L. Viola, a European researcher working for the European vinyl chloride industry, indicated, "every monomer used in V.C. manufacture is hazardous....various changes were found in bone and liver. Particularly, much more attention should be drawn to liver changes. The findings in rats at the concentration of 4 to 10 ppm are shown in pictures." In light of the finding of liver damage in rats from just 4–10 ppm of vinyl chloride exposure, Viola added that he "should like some precautions to be taken in the manufacturing plants polymerizing vinyl chloride, such as a reduction of the threshold limit value of monomer …" [22] In 1970, Viola, reported that test animals exposed to 30,000 ppm of vinyl chloride developed cancerous tumors. Viola began his research looking for the cause of liver and bone injuries found in vinyl chloride workers. Viola's findings in 1970 were a "red flag" to B.F. Goodrich and the industry.[23] In 1972, Maltoni, another Italian researcher for the European vinyl chloride industry, found liver tumors (including angiosarcoma) from vinyl chloride exposures as low as 250 ppm for four hours a day.[24]

In the late 1960s, the cancers that all of these studies warned of finally manifested themselves in workers. John Creech from B.F. Goodrich discovered angiosarcoma (a very rare cancer) in the liver of a worker at the B.F. Goodrich plant in Louisville, Kentucky. Then, finally, on January 23, 1974, B.F. Goodrich informed the government and issued a press release stating that it was "investigating whether the cancer deaths of three employees in the polyvinyl chloride operations at its Louisville, Ky. plant were related to occupational causes."

In 1997 the U.S. Centers for Disease Control and Prevention (CDC) concluded that the development and acceptance by the PVC industry of a closed loop polymerization process in the late 1970s "almost completely eliminated worker exposures" and that "new cases of hepatic angiosarcoma in vinyl chloride polymerization workers have been virtually eliminated."[25]

According to the United States Environmental Protection Agency (EPA), "vinyl chloride emissions from polyvinyl chloride (PVC), ethylene dichloride (EDC), and vinyl chloride monomer (VCM) plants cause or contribute to air pollution that may reasonably be anticipated to result in an increase in mortality or an increase in serious irreversible, or incapacitating reversible illness. Vinyl chloride is a known human carcinogen that causes a rare cancer of the liver."[26] EPA's 2001 updated Toxicological Profile and Summary Health Assessment for VCM in its Integrated Risk Information System (IRIS) database lowers EPA's previous risk factor estimate by a factor of 20 and concludes that "because of the consistent evidence for liver cancer in all the studies...and the weaker association for other sites, it is concluded that the liver is the most sensitive site, and protection against liver cancer will protect against possible cancer induction in other tissues."[27]

A 1998 front-page series in the Houston Chronicle claimed the vinyl industry has manipulated vinyl chloride studies to avoid liability for worker exposure and to hide extensive and severe chemical spills into local communities.[28] Retesting of community residents in 2001 by the U.S. Agency for Toxic Substances and Disease Registry (ATSDR) found dioxin levels similar to those in a comparison community in Louisiana and to the U.S. population.[29] Cancer rates in the community were similar to Louisiana and US averages.[30] Vinyl Chloride finds its major application in the production of PVC. Being volatile the source of exposure is majorly via inhalation as against food or water with occupational hazards being highest. Prior to 1974 workers were commonly exposed to 1000 ppm Vinyl Chloride causing “Vinyl Chloride Illness”-with Acrosteolysis, Raynaud’s Phenomenon .The 2008, Version 1, Henrietta Harrison CHAP DHQ, HPA Report classifies symptoms of Vinyl Chloride Hazards based on ppm levels with 4000 ppm having a threshold effect. 1999 IPCS report on Vinyl Chloride states the intensity of symptoms vary from acute (1000-8000 ppm) including dizziness, nausea, visual disturbances, headache, ataxia to chronic (above 12000 ppm) including narcotic effect, cardiac arrhythmias, fatal respiratory failure. In 2004, the DEFRA, Bristol Report suggested the occurrence of RADS (Reactive Airway Dysfunction Syndrome) due to acute exposure to Vinyl Chloride. The 1997,1999 IPCS, WHO, Geneva Report highlighted the Acute Dermal and Occular effects of Vinyl Chloride Exposure. Dermal exposure hazards are thickening of skin, oedema, decreased elasticity, local frost bites, blistering and irritation. The complete loss of skin elasticity expresses itself in Raynaud’s Disease as stated in ASTDR, Atlanta (2006) Report for Toxicological effect of Vinyl Chloride. Chronic Exposure leads to much popular respiratory failure (emphysema, pulmonary fibrosis) and the focused Hepatotoxicity (Hepatomegaly, Hepatic fibrosis) .Continuous exposure can cause CNS depression including euphoria and disorientation. The IPCS 1999 and 2006 ASTDR Reports identify Vinyl Chloride as a mutagen having clastogenic effects affecting lymphocyte chromosomal structure. According to ICAR, Vinyl Chloride is Group 1 human carcinogen posing elevated risks of rare Anginosarcoma, brain &lung tumors and malignant haematopoeitic, lymphatic tumors. Decreased male libido, spontaneous abortion and birth defects are major reproductive defects. Considering above,the OSHA regulates the Vinyl Chloride levels for workers not greater than 1 ppm for 8 hours or 5 ppm for 15 minutes. The EPA in collaboration with FDA has given out permissible Vinyl Chloride in drinking water as 0.002 ppm.Food(ingestion) is a trivial source of exposure. [31]

See also

References

Further reading

External links

  • Information on the aerosol propellant controversy
  • ATSDR Toxicological Profile for chloroethene / vinyl chloride
  • Chemical Identifiers for Vinyl Chloride from CAMEO Chemicals

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.